Bulk Plant Wireless Emergency Shutdown

1
Bulk Plant Wireless Emergency Shutdown

• Wireless industrial remote controls are
  manufactured with so many varying features, and
  can be used for all types of mechanical devices.

2
INTRODUCTION
In the world of technology, there are discoveries
and innovations almost at every moment. By taking
advantage of this modern technology as well as
scientific improvement, so many tools and
machines are being produced and invented
nowadays. Wireless industrial remotes are parts
of the recent inventions of technology today. It
is used in industrial sectors in to maintain and
control the huge machines. These industrial
devices are an inevitable inclusion for engineers
due to the need of high productivity as well as
safety in the industrial area. Wireless
industrial remote controls are manufactured with
so many varying features, and can be used for all
types of mechanical devices. Some common
applications of these remotes include Wireless
industrial emergency shutdown system,
Proportional Hydraulic Controls, Aircraft Auto
Refueling System, Transport Leak Detection
System, Bulk Transport Driver Authorization
System, and so on. For the purpose of this
article, our emphasis will be on one of the
applications of wireless industrial remote
control technology which is Wireless industrial
emergency shutdown system.
3
Wireless industrial emergency shutdown system is
established specifically to remove all of the
expensive wiring of mounted location emergency
stop switches. The operator can set up any number
of wireless remote E-Stop switches inside the
plant facility. They will additionally
communicate with one receiver or the controller
unit. These programs are an innovation of
contemporary industrial wireless technology and
they can work in conjunction with current,
exhausting-wired, guide E-Stop switches and plant
safety controls. One may add operator worn
emergency cease remotes to those systems.
4
Models of the Wireless Industrial Bulk Plant
Emergency Shut-Down Systems
Mannequin ASKF100-AC This is a Mounted-Frequency
remote E-Cease change, used to control units
within 433 MHZ by the use of double A
batteries. By activating the E-Cease switch, the
transmitter can be energized. The E-Stop
transmitters and receiver/controller shut-down
does not function when the remote E-Cease
transmitter batteries are drained. Model DSSF a
hundred-AC This is a direct sequence remote
E-Stop change with unfold-spectrum know-how which
operates at 2.4GHz using a rechargeable battery
setup. The E-Stop swap and receiver/controller
unit are connected by way of Safe Link. Any lack
of sign connection between the distant E-Cease
swap and receiver/controller results in an
automatic E-Stop set off till the signal is
restored. Transmitters are related to a back-up
power provided as the battery pack will be active
for only about seven days.
5

• Remember, it is highly recommended and at same
  time pertinent to carry out daily routine check
  on the E-Stop transmitter battery tests and also
  scheduled battery replacement interval. Once the
  remote E-stop transmitter power source
  (batteries) are exhausted, The E-Stop
  transmitters and receiver or controller shut-down
  will NOT operate. Therefore, also check on them
  to avoid disappointment when there is need for
  emergency application.

6
BASE ENGINEERING Inc.www.baseng.comAddress600
Rothesay AveSaint John, NBE2H 2H1CANADA

• Phone FaxToll Free 1.800.924.1010Tel
  1.506.635.2280Fax [phone]
• Salessales_at_baseng.com
• Technical Supports.abbott_at_baseng.com