Top 6 Tips For Car Dent Repairing

1
Top 6 Tips For Car Dent Repairing

• Albany Auto

2

• There are a variety of ways to remove a dent from
  your car. However, first you need to closely
  analyze the dent before you either use paint less
  dent repair or typical repair. After you have
  decided what technique you are going to utilize
  for the dent the automobile must be made ready
  before removing it. A variety of steps you would
  like to follow before getting rid of a dent in
  the best manner.
• Here are some of the top tips that will help you
  to remove all types of car dent easily.

3

• Tip 1 Wash The Automobile
•  
• The first step you must do is to scrub the
  automobile. However, ensure to use dish laundry
  soap instead of using regular automobile soap.
  The explanation for this can be the very fact
  that the majority automobile soaps out there
  leave behind some wax and silicone which makes
  dent removal tough. The concept is to remove all
  that wax off so no matter which technique you
  utilize your tools equipment doesnt slip.
•  

4

• Tip 2 Get Rid Of All Grease And Wax
•  
• By using a common grease remover, wax and grease
  should be completely removed from the spot. There
  are various grease removers you'll be able to
  use. As an alternative some lemon juice and hot
  water can also assist to get rid of grease.

5

• Tip 3 Finding The Correct Tools Equipment
•  
• Before you'll be able to repair a dent you may
  get to collect the right tools. If either side of
  the dent is accessible, then you'll be able to
  use a dolly and hammer. If youre able to solely
  access one side then use a stud welding gun which
  can be bought from most of the hardware stores.

6

• Tip 4 The Best Rule Of Removing Car Dent
•  
• Use the first to the last rule. This suggests
  that you need to start from repairing the first
  dent and then work your way to the last dent.
  Thus primarily you would follow the same sequence
  in which your automobile took dents.

7

• Tip 5 Heat Shrinking
•  
• Heat shrinking is employed to mainly shrink the
  metal a bit. Youll be able to shrink any metal
  by employing a few ice cubes with a shrinking
  hammer. In some cases you may got to use the heat
  technique that expands the metal by employing a
  torch and shrinking it quickly utilizing ice to
  remove tiny dents. Remember, applying the blow
  torch for extended time periods than required
  might harm the paint and the metal.

8

• Tip 6 Filler
•  
• After straightening the metal use some body
  filler. Body filler should be applied to the
  steel or metal directly, and then the old coating
  is removed.
•  
• Final Thoughts The above mentioned tips can work
  effectively in removing the dents. However, for
  proper car dent repair Chicago, you need to visit
  a renowned car body shop Chicago that delivers
  excellent results.

9
Contact us 4030 N Rockwell St
Chicago, IL 60618

• http//www.albanyautochicago.com/