MobileSentrix: What Really Defines A Premium Battery?

1
Welcome To Mobilesentrix

• Service
• Wholesaler Of Cell Phone Parts
• Website
• http//www.mobilesentrix.com

2
WHAT REALLY DEFINES A PREMIUM BATTERY?

3
PREMIUM ZERO CYCLE

• Zero cycle is defined as to how many times the
  battery has ever been charged before. If your
  battery was dead and fully charged, it counts it
  as one cycle. So typically if you charge your
  phone once a day, you would have 365 cycle in one
  year. These will have a much better performance
  on the battery and longevity. Most batteries in
  the market are generic and used which give you a
  lower performance and have had 100s of multiple
  cycle which tend to wear out quickly .As our
  gadgets and devices are used daily, batteries do
  tend to wear out from performance.

• AFTER MARKET ZERO CYCLE

4
PREMIUM TRUE CAPACITY

• Capacity of 95 or higher is considered true
  capacity as anything less will down perform on
  the battery level charging and performance. This
  ensures that the battery can stay charged at
  full. Generic or used battery will have
  performance issues and tend to have the battery
  discharge too fast.

• AFTER MARKET UNDER CAPACITY

5
Premium Enfused Flex

• A premium battery will have the pcb board and
  flex as one unit. An aftermarket battery will
  have 2 separate units. When it is soldered on,
  any bad solder work will quickly short circuit
  the entire battery along with the motherboard
  upon first power cycle.

• After Market Soldered Flex

6
PREMIUM FPC CONNECTOR

• The FPC connector is the connector pin for the
  battery and the motherboard. The premium FPC
  connector ensures that the male and female ends
  of the battery stay intact and can transmit
  charge properly.

• AFTER MARKET FPC CONNECTOR

7

• The filter on a battery ensures that the battery
  can properly discharge the voltage that is
  entered in the battery. A overlay filter on an
  aftermarket battery will not be able to control
  the voltage coming into the battery. This is very
  important to have when using an aftermarket
  charger. This will ensure if the cable or wall
  adapter outputs more then 1mah it can discharge
  the extra voltage quickly. The aftermarket
  batteries will overheat the phone which can
  cause much serious problems.

8
These capacitors will ensure that the power
coming out of the battery is fully regulated and
ensure that it will not short circuit the phone.
9
To ensure that the pcb board and the ic chips
dont get damaged, a premium battery will have a
plastic cap to ensure that the connection on the
pcb board will stay snug and will not malfunction
with outside electrical current. The aftermarket
battery will have tape to cover it up.
10

• Enjoy your shopping from Mobilesentrix
• Call On
• 1 [phone]
• Email Id
• sales_at_mobilesentrix.com
• Visit Our Website
• https//www.mobilesentrix.com