Permanent Vs Electro Lifting Magnets

1
Permanent Vs Electro Lifting Magnets
2
About Lifting Magnets

• Lifting magnets can be used to move a variety of
  ferrous metals ranging from small bundles of rod
  or scrap to large and heavy blocks. Both
  permanent magnets and electromagnets can be
  constructed to produce different types of
  magnetic fields.

3
Permanent Magnets

• It features capacities ranging from 330 pounds to
  10,000 pounds. Multiple magnets can be used for
  heavier loads that are too long for a single unit
  to handle.

4

• These lifting magnets can be easily turned on and
  off by simply rotating a lever. Though, a safety
  latch is built in to ensure that the magnet is
  not accidentally turned off while performing lift.

5

• It is manier times machined thin as 0.25 inch
  which is presented to the machine operator as one
  of a stack of similar parts.

6

• It is designed to lift only one piece from the
  stack at a time. Extremely reliable if applied
  properly, these are unable to alter the amount of
  magnetism produced.

7

• Many machining operations are performed on thick,
  block-shaped material which is done by permanent
  magnets.

8

• The lack of an electrical hookup or a recharging
  requirement is the biggest strength of these
  types of magnets.

9
Electromagnets

• Electromagnet along with variable voltage control
  allows the operator to manage the magnetic
  strength and select only one piece from the
  stack.

10

• Electromagnets creates magnetic field by using an
  energized electrical coil wrapped around a steel
  core to orient particles within ferrous materials
  in one direction.

11

• Though it requires constant power source, it can
  even be looked at as an advantage depending on
  how the magnet is being used.

12

• Generally built to run on DC current, it creates
  the need for a rectifier.

13

• This type of lifting magnets is useful for
  applications where the strength varies or remote
  controlling is desired.

14

• Electromagnets are the most cost-effective
  magnets per pound of lift. And even the
  capacities can be extended up to 10,500 pounds.

15

• It reduces the costs of equipment and operation
  as these are self-contained magnets which operate
  on 115-volt AC power.

16

• If you have any requirement or need any other
  information related to lifting magnets then
  please contact with us on below detail-
• Tel [phone]
• Toll-Free(800) 965 4968
• Fax[phone]
• E-mailsales_at_armsmag.com
• Address 700 Sunset Pond Lane, Suite 4
  Bellingham, WA 98226
• Website-
• http//www.armsmag.com/lifting-magnets.htm