Single Piece Dental Implants

1
Single Piece Dental Implants
http//lbrdentalimplants.com
2
Single piece dental implants

• The Single-Piece implants are highly unique in
  design and effective in function as it features
  prosthetic abutment and the surgical implant as a
  unit but not as two different entities. This
  eliminates the occurrence of Micro Gap. And
  whats more, the patient need not wait months for
  the procedure to complete. Therere no traumatic
  surgical procedures, no pressure of finding the
  right removable dentures until implants find
  stability, and no hint of uncertainty of whether
  the procedure would be successful or not!

3
Convenient for whom

• Single piece dental implants are the most
  convenient for the patient/doctor because of the
  following reasons
• Single piece dental implants can be inserted
  flapless this greatly reduces healing time.
• implant can be placed in hardly 10 minutes.
• A single trip of 3 days is enough for the
  replacement of teeth
• They can be immediately loaded so need to wait
  for osseointegration
• Affordable treatment because the single piece
  implants are inexpensive
• Lifetime warranty on these implants because of
  their dependable solid structure
• No swelling or bleeding as these are flapless.
• The risk of periimplantitis is very low because
  of the shorter diameter of the neck of these
  implants

4
Single piece dental implants

• One piece dental implants are more reliable and
  strong compared to the conventional screw based
  implants because they are single component solid
  implants. Conventional implants with screw
  joining the implant and abutment have many
  complications. The connecting screw is as thin as
  2mm and its breakage is common. Loosening of the
  screw is common after several years and they have
  to be periodically tightened. 2 piece implants
  with angulation or in cantilevers are more prone
  to screw loosening and breakage. Because of the
  joint in between the implant and the abutment,
  there is leakage of food debris causing bone
  loss. As such 2 piece implants are never given
  lifetime warranty. All companies are eliminating
  the use of screw and shifting to single piece
  implants or they are incorporating Morse cone in
  2 piece implants.

5
Two or Three Piece Implant

• Conventional implants with screw joining the
  implant and abutment have many complications. The
  connecting screw is as thin as 2mm and its
  breakage is common. Loosening of the screw is
  common after several years and they have to be
  periodically tightened. 2 piece implants with
  angulation or in cantilevers are more prone to
  screw loosening and breakage. Because of the
  joint in between the implant and the abutment,
  there is leakage of food debris causing bone
  loss. As such 2 piece implants are never given
  lifetime warranty. All companies are eliminating
  the use of screw and shifting to single piece
  implants or they are incorporating Morse cone in
  2 piece implants.

6
Material

• Under a copious irrigation, serial drilling of
  implants was done to prepare the implant socket.
  The drills are specially designed to collect the
  bone debris in their flutes. This debris can not
  only indicate the quality of bone but can also be
  used in the case of autogenous bone grafts. After
  measuring of the soft tissue thickness, proper
  implants were selected and inserted into the
  socket. The inserted implants gained the 35Ncm
  insertion torque, which is acceptable for
  immediate loading of implants.

7
Methods

• The patient received antibiotics (amoxicillin and
  metronidazole) and an analgesic before the
  surgery and continued 1-week post-surgery. After
  a local anesthesia, the incisor was extracted
  using a traumatic technique with pre-elevator to
  preserve remaining alveolar bone. Then the soft
  tissues in the sockets were carefully removed,
  and a full-thickness flap was reflected.
• The temporary acrylic bridge, which had been made
  for the patient, was relined with self-cure
  acrylic resin. Afterward the bridge was cemented
  on the abutments with zinc phosphate cement. It
  was trimmed in a natural way to simulate previous
  teeth contour, which will lead to soft tissue
  formation with a natural contour to be formed
  near crowns. Three months after insertion
  surgery, the implants were osseointegrated, and
  the abutments were prepared using high-speed
  carbide burs. Direct impression using additional
  silicones was made. A resin framework was tried
  in intraorally to ensure the passive fitness of
  the final bridge, and finally, after confirmation
  of the esthetic characteristics of the bridge by
  the patient, the bridge was cemented.

8
Types of single piece dental implants

• There are two types of Single piece dental
  implants
• KOS Dental Implants
• BCS Dental Implants

9
KOS Dental Implants

• The KOS Implant system is made up of the highly
  fracture resistant Ti6Al4V ELI Titanium alloy
  pursuant to ASTM F136. They are single piece
  implants with apical compression threads designed
  for immediate loading.

10
Special features of KOS dental implants are

• KOS system is backed by 13 years of experience
• They can be immediately loaded that means you can
  get your permanent teeth in 3days
• Very much affordable, bringing it within the
  reach of a significantly greater number of
  patients
• Can be inserted transingivally i.e by flapless
  method
• Quicker healing time
• Very minimal bleeding
• No post treatment pain or discomfort
• No sutures necessary
• Lifetime warranty offered.

11
BCS Dental Implants

• These Implants gets their support from engaging
  the hard cortical bone or the strong basal bone
  .where as other Implant gets their support from
  soft spongy bone.
• These are made as highly polished surface
  Implants which never allows the bacterias to
  grow on the Implant surface .This characteristics
  feature make BCS Implants eligible to get place
  in the immediate extraction places even though
  the tooth was infected before.

12
Special features of BCS dental implants are

• The BCS implants can be placed immediately after
  extraction.
• more resistant to infections
• less maintenance needed
• This implant system heals faster
• less bone resorption around implants
• BCS implants are smooth surface implants
• less risk of periimplantitis.

13
Difference between one piece and two piece
Implant
  One piece Implant   Two Piece Implant
The implant and the abutment are fused they are manufactured as one piece. The implant and the abutment are separate. The abutment is either cemented or cold welded. If the abutment is secured with a screw onto the implant, then it can be considered to be three pieces.
Simple. No joint. Single piece. Complex. Two parts joint by screw.
Single sitting surgical procedure and very often flapless. Implant procedures are less time consuming than that required for bridgework. Very often more complex surgical procedures are necessary, spread over 2 or 3 sittings in a period of 3-6 months.
Immediate Loading i.e patient can be given the crown/bridge the very next day. Delayed Loading very often a waiting period of minimum of 3 months is necessary.
A wide range of sizes and designs are available suiting various bone types and measurements. Limited sizes and designs are available thereby limiting their application.
These work out a lot more cost effective in comparison with two/three piece implants. Expensive with respect to the costs of the implants as well as the time taken for multiple procedures
14
Advantages

• A single piece implant being a single component
  structure has no joints or a connecting screw.
  This eliminates all the nagging complications of
  2 piece implants. As such these implants do not
  have any problems that are associated with
  conventional screw based implants.
• No screw as such no screw loosening or breakage
• No micro leakage between implant components as
  these are single component and hence
• No crestal bone loss, which is commonly seen in 2
  piece implants
• Very strong a 3mm single piece implant is
  stronger than 4 mm conventional implant
• These are designed specially for immediate
  loading. As such permanent crown or bridge is
  placed in 3 days.
• The procedures are flapless, quick and simple.
  There is no need to cut the gum. Patients on
  aspirin or heparin need not stop the medicines

15

• If you want to know more details about Single
  Piece Implants, contact us Dr K A ReddyPlot 45
  46, 201, Apurupa Kushi, Kavuri Hills, Sri Rama
  Colony, Madhapur, Hyderabad, Telangana 500033
• Email  amarlbr97_at_gmail.comMobile 91
  9849008623
• http//www.lbrdentalimplants.com/implant-services/
  single-piece-vs-two-piece-implants/
•  

16

• Thank You..