How to Laminate Hardwood Flooring

1
How to Laminate Hardwood Flooring
2
Hardwood flooring should be easily to attempt if
the process is carried out carefully. The process
to laminating the plywood flooring is simple and
takes a few steps. The process begins by
assessing the measurements of the flooring that
needs to be laminated which includes taking out a
tape measure and measuring the square feet of the
hardwood flooring that has to be carried out.
3
The laminate flooring should be easy to carry out
if the measurement is carried out carefully which
means once the measurements are made then the
area should be cleaned of any debris and then the
process of lamination should be started.
4
The process of lamination or hardwood floors
should take place easily and quickly if the floor
is clear of any debris. The floor should be
cleared of anything that would interfere with the
lamination process of the floor that would make
it dirty and unprofessional looking.  The
existing floor should also be removed so that
laminate can be placed after the base floor is
removed using pry bars and hammer. Then once the
plywood and base flooring are removed the
moisture barrier and underlayment and plank
should be fitted on the floor carefully so that
the laminate can be carried out.
5
The casing should be cut off to make room for the
laminate flooring. The floor underneath should be
sanded and cleaned completely to make the new
flooring as clean as possible. It also has to be
vacuumed so that the floor is free of any debris
or materials that may interfere with the new
hardwood floor installation Lawrenceville.
6
Then check the moisture level of the plywood
floor or the sub floor or even both floors to
make sure that the moisture level meets the
manufacturers limit for moisture especially the
one from which the flooring is to be purchased. 
Then secure the new flooring in by screwing them
into place in order to ensure that the flooring
is stable and does not move with the new
flooring. The flooring should be secured into
place and should fit in with the new measurements
to ensure that hardwood that takes place is
correct.
7
The hardwood that is secured is then secured
correctly because of the way the subfloor is
cleaned so that the flooring is put into place
correctly. The under layer and moisture barrier
can then be placed onto the floor to make the
floor more moisture resistant. The structural
guidelines for laminate flooring should also be
followed so that the floor can be added right
onto the floor. The new floor should be added to
make the floor look more laminate and better than
before. The more measurements are followed the
better the flooring is for the hardwood.
8
Hardwood Floor Installation Hardwood Floor
RefinishingHectors Magic Carpet320 Bethesda
Park TrailLawrenceville GA 30044(404)
513-0144http//hectorsmagiccarpet.net