How to Install a 500w Amplifier - PowerPoint PPT Presentation

About This Presentation
Title:

How to Install a 500w Amplifier

Description:

If you are looking for car speakers for sale, Visit CT Sounds store. Without speakers, you could never experience high-quality music reproduction in your car. Contact us for more information! – PowerPoint PPT presentation

Number of Views:19
Slides: 10
Provided by: ctsounds
Category: Other

less

Transcript and Presenter's Notes

Title: How to Install a 500w Amplifier


1
How to Install a 500w Amplifier
2
The process of installing a 500w amplifier isnt
easy and is best left to the professionals.
However, if you are a dedicated hobbyist, you can
do it as long as you understand the procedure. It
is important to ensure that you have followed the
necessary safety precautions as the electrical
systems can prove to be dangerous.
3
Some of the tools that are necessary include wire
cutters, screwdrivers, crimp-on and o-ring
electrical connectors, sandpaper, masking tape
and utility knife. You may also need some more
tools but this will depend on the cars system.
It is also a good idea to have the car manual
with you as this will guide you in removing the
head, electronics, access wiring and speakers.
4
Preparation
You will need to begin by considering the
placement of the amp. Some of the common issues
are in the rear next to your subwoofer enclosure
or even below the passenger seat at the front. A
good idea would be to select a location where
there will not be a lot of wire runs and where it
is possible to secure. Take a red wire with a
thick gauge and an inline fuse. Ensure that it is
able to reach from the battery to a wire that is
3 feet and equally thick.
5
An RCA cable wills also be necessary for carrying
the signal to the right and left from your head
unit to a thin wire for the remote-on. You will
also need speaker wire that is enough for
reaching all the speakers and subwoofers from the
cars amp. A good idea would be to buy an 500w
amplifier kits bundle for the wiring as this will
simplify the amp installation process.
6
Connecting The Amplifier
After you have disconnected the car battery,
attach power wires fused end to a positive
terminal using the o-ring connector. Ensure that
the cable is running through the cars firewall.
You can use any port that you find convenient to
the amp. Ensure that the ground wire has
been connected to a metal bolt that is quite
convenient or the screw should be attached to the
cars body.
7
Connect Speaker
Attach the right gauge of the speaker, which
should be a gauge of 12 or 16 to each of the
speaker or the subwoofer. Ensure that you have
labeled each wire using a masking tape and note
where you place the speaker. Attach the speakers
to an amp and ensure that the negative and
positive connections are matched.
8
Contact Us
Address Inglewood, CA, U.S.A Phone (832)
6102035 Email Sales_at_ctsounds.com
https//plus.google.com/CTSounds https//www.ins
tagram.com/ctsounds/ https//www.youtube.com/c/ct
sounds https//www.facebook.com/ctsounds713 http
s//twitter.com/ct_sounds
9
Thank You for Watching
Write a Comment
User Comments (0)
About PowerShow.com