How to acid stain a concrete wall

1
How to Acid Stain a Concrete Wall

• When it comes to acidic dyes and concrete walls
  are unique challenges

2

• When it comes to acidic dyes and concrete walls
  are unique challenges. Most of acid dirt
  available for concrete water consistency. When
  you try to apply that acid dyeing to the wall, it
  will not adhere, but will run down the wall and
  will be on all the floor. If you would like to
  add depth and color to your concrete wall, there
  is a solution, nonetheless. To achieve a
  beautiful acid-stained smart concrete wall,
  perform the following steps.

3

• Look for a supplier to color the concrete acid
  gel. If you are searching on the internet, enter
  "gel concrete acid stained" Source gel Specific
  acid stain is included in the following
  resources.
• Select color or colors. Concrete acid dyeing work
  by chemical action on concrete. These acid stains
  made from natural minerals. Although the colors
  are limited, they perform a lush brown range like
  avacado. You can apply a second coat to change
  the appearance of a specific color or achieve a
  dark color by overlaying mixed colors with other
  colors. Please note that cement only, acidic dyes
  will not work with sand or rock. If your
  "concrete" wall is a mixture of rock and
  concrete, you can not get the required appearance
  by acid staining.

4

• Prep the wall. Acid dyeing can not be used if the
  wall was previously waterproofed. If your
  concrete wall has some paint residue, varnish or
  adhesive, apply paint or adhesive strippers made
  to remove the problem residue before applying
  dirt it must be used. Including residues or
  arbitrary regions will not accept any acid dyeing
  if it affects the color of your acid dyeing or is
  not properly deleted.

5

• Prep your work area. Because you are working with
  an acid, which could damage any surface you want
  to mask, cover any surrounding surfaces you want
  to mask and protect. If you are working indoors,
  the floor near your concrete wall, wooden trim
  and ceiling should be covered. If you are working
  with a retaining wall on the street, if you are
  not staining the surface as well, you would like
  to cover concrete walking under the wall.

6

• Please wear protective clothing. You need rubber
  gloves, old working clothes, sunglasses, and
  apply gel concrete acid dyeing. You are working
  with acid. When it stains your clothes, if you
  happen to contact with him, it will irritate the
  skin and eyes.

7

• Apply gel stained acid concrete. Gel dyeing has
  consistency of thickness pudding. I believe it is
  easy to operate with the help of putting some
  paint into the tray. To apply dirt, please use
  foaming brush or paint pad. If you are using one
  color, apply a uniform layer all over. A Gallon
  of gel acid stain contains from 200 to 300 square
  feet, depending on how your porous wall is.
  Depending on the type you want, if you are using
  two colors, you can overlap random patterns to
  create a "marble" appearance. You can even use
  their creativity to make the patterns like sun,
  diamond, or something more complicated.

8

• The gel hardens the concrete acid dyeing on the
  wall according to the instructions on packaging.
  Cure time within the range of the minimum value
  from 2 to 8 hours. If you work outdoors on a
  concrete, make sure the wall is protected from
  rain and water during curing time. Wall treatment
  modifies the appearance of white residue and
  color on the wall you notice puff. This is normal.

9

• Neutralize the concrete acid stain. After curing,
  time has passed, you are a mixture of sodium
  bicarbonate and water, you can neutralize acid
  dyeing. Please use 1 or 2 tablespoons of sodium
  bicarbonate per gallon of water. I use a pump up
  sprayer and spray the mixture of baking soda on
  the wall from the top down. I used a large sponge
  soaked the sponge mixture so that it sprayed like
  running down the wall and not compromising the
  following colors. Assistant store VAC is used to
  collect lips-free mixture. If you are working
  with the outside of the wall and not very
  concerned about the mess, you can saturate the
  mixture and the concrete walls with your own
  spray bottle.

10

• Please clean the wall. When you neutralize the
  wall, it cleans the wall and uses clean water to
  remove all the residue. Use a nylon brush to
  remove stubborn residues.
• It can be dried. The walls are allowed to dry
  thoroughly before sealing. This may take up to 24
  hours depending on the climate.
• I admire the wall of a new acid dyeing concrete!
  Acid Dyeing The wall of concrete is easy and fun
  to do. Once you master the art of acid-dyed
  concrete, all the walls of your home may be
  concrete!

11

• If you want to buy light weight concrete wall in
  Myanmar, join with Smart Precast Company, which
  is one of the leading manufacturer of AAC Block
  and APC Block in Myanmar. You can view
  information and buy concrete block at
  baganmart.com, which is Myanmar B2B e-commerce
  platform and Myanmar online shopping for business
  products buyers.

12
Thanks For Watching

• www.baganmart.com
• www.facebook.com/BaganMart
• www.twitter.com/_at_BaganBlog