How to Connect Wireless Printer To Your Printer Using Various Methods

1
How to Connect Wireless Printer To Your Printer
Using Various Methods
2

• Wireless printers are the advanced versions of
  the cable printers. Wireless printers can be kept
  anywhere and can provide us with the output
  without using cables. One of the main advantages
  of wireless printer is that it does not need
  wires to get connected to the system. To connect
  the wireless printer to your system, follow the
  simple instructions given by Brother Printer
  helpline number. These steps are easy to follow
  and do not consume much time.

3

• If you are not able to follow the procedure or
  you have any other issues related to your
  printer, you can call the customer support number
  of Brother Printer helpline Australia. Their
  staff will resolve your issues and will give you
  the best possible solution. First, the users have
  to unpack their new wireless printer. Turn on the
  printer after connecting the power cord and run
  the startup. After that you can select any of the
  option below to connect the printer to your
  system.

4
Using the WPS (Wi-Fi Protected Setup)

• To connect the devices together over a wireless
  connection, WPS has two modes. One is named as
  'Pin' and other is known as 'Pushbutton'. Out of
  these two modes connecting the printer through
  pushbutton is the easiest way. But before
  starting the process, you must keep in mind the
  few things such as your router and printer should
  support the WPS pushbutton mode.

5

• To know this, you can go through your printer and
  router's manual. You have to make sure that your
  wireless router should consist of a physical
  pushbutton.
• You have to ensure that your network must use the
  WPA or WPA 2 security. If no security or WEP
  security is used then most of the WPS wireless
  routers will not be able to connect.
• After checking all these condition, follow the
  instructions to connect the wireless printer.

6
USB setup of wireless

• Printers which do not have the touch display can
  use this wireless setup method during the printer
  installation process. While following this
  method, you have to connect a USB cable between
  the printer and the computer. You must keep in
  mind that you have to connect and disconnect the
  cable only if the software asks you to do so. In
  some cases, the software may find your wireless
  settings automatically.

7

• If any Problems regarding printer,
• Just dialing by
• Brother Printer Helpline Number
• Australia 61-283206033
• Original Source
• http//bit.ly/2lOcwFP