Great way to making a coconut shell crafts

1
Great Way To Making A Coconut Shell Crafts

• The hardest part of creating coconut shell
  crafts made from coconut is opening the coconuts
  and removing the meat.

2

• The hardest part of creating coconut shell
  crafts made from coconut is opening the coconuts
  and removing the meat. If the refrigerator is
  kept in a coconut for an hour before cutting, the
  shell becomes easier to penetrate the meat
  becomes easier to remove.
• After the coconut is open and clean shells are
  universal containers for different boats. Leave
  natural coconut for a rustic, island feel their
  crafts. You can also paint the shells or attach
  ornaments such as rhinestones, gemstones and
  buttons using a single epoxy adhesive.

3
Bird Feeder

• Make a hole in one of the dark spots on one end
  of the coconut. Keep the coconut on a bowl with a
  side hole down and let it drain. Fresh coconut
  for one hour to facilitate cutting.
• Keep the coconut in a vise. Cut the coconut in
  half with a metal saw. Remove the meat for your
  own use, or leave it inside a coconut for the
  birds.
• Drill the three 1/4-inch hole through the edge of
  each part into two coconut. Space the holes
  evenly.

4

• Cut six equal lengths of twine. Insert one end of
  each piece of string through the holes around the
  rim, from the outside to the inside. Pull the
  line through each 4-inch hole. Tie the end of the
  string to itself on the top edge of the coconut.
• Collect three divided sections at the opposite
  end of the coconut and tie them together. Hang
  three chains joined sections over S hook.
• Cover the perforated hole in one of the coconut
  halves with masking tape. Fill the bird feeder
  with seeds.

5
Planter

• Pierce one end of the coconut and pour the milk
  into a bowl. Fresh coconut for one hour. Keep the
  coconut in a vise.
• Cut the coconut in two parts with a saw 3 to 4
  inches from the top. Clean the coconut meat of
  both sections with a sawing knife. Drill three
  1/4 inch holes in the bottom of the large cross
  section. Leaves in the pot.

6

• Place most of the coconut on a work surface so
  that the cutting edge of the face down. Apply a
  full quarter-sized epoxy adhesive part to the top
  section of a coconut.
• Press the bottom of the coconut of the smaller
  portion of the tail, with the widest part of the
  cut side. Press the top of the coconut for two
  minutes. Leave coconut to rest for 24 hours.
• Make the coconut oil, so that a small part down.
  Line the bottom of the larger cross-section with
  coffee filters, and then fill it with soil and
  plants.

7
Thanks For Watching

• www.bagantrade.com
• www.facebook.com/BaganTrade