How To Make Brick Driveway Paving – Rimacon

1
How To Make Brick Driveway Paving
2
(No Transcript)
3
Lay out the driveway in the shape you want it

• Stake it out using wooden stakes and marking
  spray paint.
• A string line tied between stakes can help guide
  you while laying out the shape and grade as well
  as during the actual construction. This will keep
  you on grade.
• Be sure the driveway will be able to drain when
  completed.

4
(No Transcript)
5
Excavate the area for the driveway to a depth of
at least 12 to 14 inches

• Because of the amount of digging and excavated
  material to be disposed of, it is recommended
  that you hire an excavation contractor.
• The contractor will have the equipment, haul
  truck, experienced personnel and location
  necessary to haul off the waste.

6
(No Transcript)
7
Bring in the stone base

•  You will need either stone screenings or
  pea-gravel, depending on what is available in
  your area.
• Begin spreading the rock using shovels, a
  Wheelbarrow and a garden rake.
• The small rock will form a solid base once it has
  been compacted.
• The string line you stretched between the grade
  stakes in the beginning will help here.

8
(No Transcript)
9
Set the brick

• Starting in the middle will ensure that the
  bricks on each side, or edge, are the same size.
  This provides a uniform look.
• Spray water from a hose over the brick to settle
  the sand into the joints. This will also clean
  off the brick.

10
(No Transcript)
11
Task Completed

• These are some steps which will help you to
  complete the Driveway paving task complete.

12
(No Transcript)