Injection Molding vs Thermoforming - ThermoFab

1
Welcome To ThermoFab.com
ThermoFab launched ThermoFab Technologies in 2003
to focus exclusively on Research Development.
This arm of our business is committed to ensuring
we stay abreast of new technologies, trends and
tools that will allow us to stay ahead of the
competition and serve you better.
2
3 Major Advantages Of Thermoforming In Comparison
With Injection Molding
Plastics or plastics made products have become
part and partial of our life. You know how these
products are made. There are two major methods
thermoforming and injection molding for
manufacturing plastic products. Before going
ahead to mention the advantages, I want to brush
up your knowledge about these two. Thermoforming
is a process of manufacturing plastic enclosures.
In this process, a flat sheet of plastic is
heated and the preheated sheet is brought into
the contact with a mold for getting the desired
shape. Vacuum, direct mechanical or pressure
force is applied and the process gives tight
specifications, close tolerances, and sharp
detail for your custom plastic parts.
3
Talking about the Injection Molding, it includes
taking or pellets and heating this material is
plastic of your choice in the form of granules
going on until a melt is obtained. Then the melt
is inserted into a split-die mold or chamber to
let it cool down for getting the desired shape.
The part is ejected after opening the mold and
the cycle is repeated again.
4
Advantages of thermoforming compared to injection
molding

• Thermoforming offers many advantages over
  injection molding. Here, I am going to talk about
  only three benefits that are as follows
• There is a limit choice of patterns, textures and
  finishes in injection molding vs. thermoforming.
  It means thermoforming offers you an extensive
  range of choices in terms of textures, patters
  and finishes. It is sure that you will find
  thermoforming as the best way to get your desired
  plastic enclosures and parts.
• Injection molding is for large production, but
  thermoforming is ideal for small batch
  production. The later, thermoforming, speeds up
  your tool production cycle.

The thermoforming has the ability to produce
thin-walled parts that is not possible with the
injection molding.
5
Choose The Right Molded Plastic Manufacturer
Are you a buyer of plastic parts or products? Do
you need to collaborate with a plastic
manufacturing firm to run your own business? If
yes, it is sure you will be looking for a good
manufacturing organization that can fulfill your
need.
6
The market around the world houses numerous
Molded Plastic Manufacturers and this
availability makes it hard for you to choose the
right one. Being new in the industry makes it
also hard for getting familiar with the names of
firms involved in manufacturing molded plastic
parts or products. Therefore, you should look
into local business directories, ask your
colleagues or friends and conduct searches on the
Internet to know the organizations producing
plastic products.
7
After getting the names, ask the Plastic
Manufacturing Company of your list for producing
quotes in detail. Study the get quotes and find
out which firm is offering plastic parts or
products as per your demand at a lower cost
without any compromise in quality. As your
business is completely dependent of the products,
so you never compromise with the quality of
products. Always try to get high quality plastic
products even when you have to pay a little
extra.
8
In your business, time is money for you. Never
miss a second in operating your business. You can
operate your business successfully when you get
your required products within the time.
Therefore, it is essential for you to choose the
one from the crowd of Molded Plastic
Manufacturers that can deliver your needed
products within the stated time. You know
experience matters a lot. An experienced person
is very different from an amateur and works with
more perfection. Therefore, you should choose the
firm with more industry experience.
9
The product production capacity is the aspect
that you cannot ignore while selecting a Plastic
Manufacturing Company. Before you make a final
decision, you need to know that a particular firm
is capable of meeting your rising demands. It
means you need to know that a firm can fulfill
your demand of plastic parts or products without
any compromise in quality and delivery. You know
you should also focus on market credibility while
choosing a firm, which is engaged in
manufacturing plastic products. A firm with high
market reputation makes every possible effort to
keep it market reputation maintained. Such a firm
works in the best possible way to serve you and
maintains a good business relationship.   
10
Plastic parts or products are important for many
of you. For some of you, plastic is the base for
operating a relevant business and so, you should
choose the best plastic manufacturing company for
your own need.
11
Contact To Thermofab.com
Add- 76 Walker Road Shirley, MA 01464 Phone-
888-494-9777 Fax- [phone] Email-
engineering_at_thermofab.com Website
http//www.thermofab.com/
12
(No Transcript)