DIY-How to change your car Tire - PowerPoint PPT Presentation

About This Presentation
Title:

DIY-How to change your car Tire

Description:

You can experience flat tire anytime, anywhere. So it is always advisable to carry a spare tire plus one should be thorough with the process of changing a flat tire. – PowerPoint PPT presentation

Number of Views:722

less

Transcript and Presenter's Notes

Title: DIY-How to change your car Tire


1
Tata Spare Parts
  • DIY-How to change your car Tire

www.bpautosparesindia.com/tata-spare-parts/
2
Introduction
  • To tell you honestly, changing a tire is a pretty
    simple task, if you are prepared and if you know
    how to do it.
  • Do you want to be able to change a tire without
    anyone's help?
  • Yes, then we are ready to help you too provided
    you are willing to put in a little effort.

3
Essential Tire-changing Tools
  • Spare tire
  • It is Usually located under the floor mat in the
    trunk.
  • SUVs or trucks may have the spare mounted
    underneath or on the back of the vehicle.
  • TIP  Check your spare tire frequently and ensure
    it is properly inflated.
  • Jack
  • Lug wrench

4
Essential Tire-changing Tools
  • Flashlight with running batteries
  • Flares and reflective triangles
  • Gloves.
  • Leather is suitable since it works well in a
    variety of weather conditions.
  • Wheel wedges
  • Flat tire repair kit
  • Optional, but ideal if you can't take your tire
    to a mechanic shop right away.

5
Find a safe Spot
  • In case your car gets a flat tire while you are
    on road,
  • Slow down, 
  • Switch on your hazard lights, and 
  • Find a safe place to change your tire.
  • Suitable locations for changing a tire include
  • A side street.
  • The shoulder of an off ramp.
  • A parking lot.
  • A long, straight road.
  • An alley

6
Remove your spare and take out the tools you
need.Position flares or reflective triangles
behind your vehicle for safety, if you are
changing your flat tire on the road.To keep
your vehicle secure while it's on Jack, place
wheel wedges against the tires opposite of the
flat.Use the flat end of the lug wrench to pull
the wheel cover or hubcap off.
  • STEPS FOR CHANGING YOUR TIRE

7
  • Now place your jack beneath your car and raise it
    up to connect with your car's frame.
  • Stretch the jack until your tire is at least 6
    inches off the ground
  • Now simply unscrew and remove the lug nuts.
  • Line up the spare tire with the exposed lug nuts
    and position it in place.
  • Now again put the lug nuts and tighten them.
  • Once the car is back on the ground, you can
    tighten the lug nuts.

8
  • Now slowly lower the jack until the tire touches
    the ground.
  • Now, tighten the lug nuts with the wrench to
    secure them in place.
  • Again place the hubcap or wheel cover, if you
    have one.
  • At last, again check the pressure on your spare.

9
  • In case you still find any difficulty with the
    process or finding reliable and high quality
    Spare parts, BP Auto Spares India is always at
    your service.

10
Head OfficeBP Impex4984-4985 Roshanara
RoadDelhi 110007, INDIAPhone - 91 11
23824308, 91-9971119928info_at_bpimpex.inwww.bpaut
osparesindia.com
  • Contact Us
Write a Comment
User Comments (0)
About PowerShow.com