Decking Oils Paints

1
Decking Oils Paints
2

• Pompeis Marine has a number of options for
  decking oils and timber sealers. Firstly around
  the house have alook at the Crystal Deck oils and
  sealers. Then if your in a harsh environment or
  doing up your boat we have have the Norglass and
  Hempel range of Marine paints.

3
Crystal Decking Oils

• This will give you a clear natural finish from
  43.00 compare and save. This is a rich natural
  premium oil.
• A range of colours is also available. Decking oil
  replaces the natural oils back into the bare
  timber lost through weathering. Clear turps based
  with no gloss finish at all. Washes up n mineral
  turps. Application on rough sawn timber is best
  by brush. Smooth timber can be rolled.

4

• If spraying, follow directly after with brush or
  roller while still wet. Can be used on interior
  or exterior surfaces. Drying and recoat time is
  best left for 24 hours, though dry exterior
  timber may be recoated sooner. The dryness of all
  timbers new and weathered can vary greatly.

5

• Before applying the first coat or recoating try a
  small test patch with a thin coat. Check to see
  that it soaks into the timber completely and does
  not leave a sticky surface. Coverage ranges from
  12-20 square metres per litre depending on how
  dry the timber is.

6
Clear Wood Preservative 

• This will give you a clear natural finish
• A range of colours is also available. Clear wood
  preservative replaces the natural oils back into
  the bare timber lost through weathering. Clear
  turps based with no gloss finish at all. Washes
  up in mineral turps. Application on rough sawn
  timber is best by brush. Can be used on
  furniture. Smooth timber can be rolled. If
  spraying, follow directly after with brush or
  roller while still wet. 

7
(No Transcript)
8

• Can be used on interior or exterior
  surfaces. Drying and recoat time is best left for
  24 hours, though dry exterior timber may be
  recoated sooner. The dryness of all timbers new
  and weathered can vary greatly. Before applying
  the first coat or recoating try a small test
  patch with a thin coat. Check to see that it
  soaks into the timber completely and does not
  leave a sticky surface. Coverage ranges from
  12-20 square metres per litre depending on how
  dry the timber is.

9
CLEAR TUFF TIMBER FINISH

• Dries to a hard durable gloss finish
• Can be painted on most timber surfaces tuff
  enough for use on flooring coverage on bare
  timber 5 ? 10 square metres per litre coverage on
  coated timber 10 ? 14 square metres per litre
  drying and recoat time is 1 to 3 hours can be
  brushed, rolled, or sprayed interior and
  sheltered exterior surfaces washes up in mineral
  turps available in 1 and 4 litre cans

10
Norglass Weatherfast Poly Clear

• A tough single pack, abrasion resistant gloss
  coating with high levels of U.V inhibitors for
  interior and exterior use. for floors, furniture
  and marine applications. Also available in satin
  finish for interiors to produce a natural lustre.
  Contains a high level of UV screening agents
  making it suitable for inside / outside use.
  Recoat after 8 hours. Coverage up to 14 sq m/l.

11
Norglass Weatherfast Marine Varnish

• A super high gloss finish with maximum levels of
  U/V inhibitors and stabilisers for areas of
  extreme exposure. for panelling, doors, hand
  rails and general varnish . Not suitable for
  floors or traffic surfaces. Coverage up to 12 sq
  m/l. Recoat after 16 hours.

12
Norglass Weatherfast Premium Timber Oil

• A modified synthetic resin coating for feeding
  the timber where a natural grain appearance is
  desired. Contains U/V inhibitors for additional
  protection. Fast drying and does not leave a
  greasy film. Excellent penetration into open
  grained woods. For use on decks, floors and
  furniture. Coverage around 12 sq m/l.

13
Norglass Northane Clear Gloss

• A two-pack, non-yellowing polyurethane
  withoutstandingchemical and abrasion resistance.
  Ideal for coating clear corrugated roof panels to
  seal leaks. May be used in continuously immersed
  conditions. Use on concrete trucks, earthmoving
  equipment, boats, aircraft, hospital walls and
  floors, fish ponds, and food surfaces.

14

• Good for all surfaces. Excellent heat resistance
  and durability makes this a premium clear
  coating. For use on floors, furniture, and
  exterior applications. A satin finish may be
  achieved by using Norglass Flattening Agent
  (interior use only). Can be used on any surface,
  extremely tough, water proof. Coverage upto 12 sq
  m/l. Re coat after 16 hrs. Comes in colors

15

• For more update, visit us

http//pompeismarine.com/