Cut Gasket (1)

1
WELCOMETOAMERICAN SEAL AND PACKING
2
O-Rings

• O-ring are used in applications from the simple
  to the exotic chemical and high temperature
  applications. You can order o-rings from our
  ecommerce website http//www.sealsales.com. We
  sell high quality parts in a wide range of
  materials. An O-Rings works as seal to contain a
  liquid or gas while sealed. It includes material
  Nitrile, Buna-N, Viton (Black), Viton (Brown),
  Aflas, PTFE, PTFE encapsulated Viton or
  Silicone, EPDM, Neoprene, Silicone, E.P.R.,
  Kalrez. We also offer 4 Lobe Q-Rings which
  allows the O-ring to seal at a slightly lower
  load.

3
Shaft Seals

• There are many types of shaft seals. We offer
  most of them including metric. If you need Shaft
  seals, which includes lip seals, and face seals,
  we have a full range that is ready to ship from
  the stocking locations of American Seal
  Packing. We offer them directly on our ecommerce
  website site https//www.sealsales.com. Many of
  our information sites are listed at
  http//seal.business. Whether you need it for
  replace old seals or for new seal, we will
  provide you at affordable prices. We are offering
  Single spring seal and pump seals which are
  various types according to your needs.

4
Spiral Wound Gasket

• Spiral wound gaskets are available in many
  different designs. Supportive inner and / or
  outer rings help to contain pressure or vacuum. A
  V-shape Metal Strip and a Strip of Non-Metallic
  Filler Material including flexible graphite,
  PTFE, Non-asbestos, Thermica or Mica. Selecting
  the correct metallurgies and sealing filler are
  the key to successfully sealing your industrial
  applications.. Check this product online on our
  website.
•  

5
Cut Gasket

• Gaskets can be cut from any of our sheet
  gasketing materials. Using one of the following
  techniques Hand cut, Die Cut, Laser cut,
  waterjet cut or a knife edge CNC (flash cut). Cut
  gaskets go into products you see and use every
  day including your car and your phones. We off
  materials that can be cut for the simple
  applications such as sealing air, to the more
  difficult designed and manufactured for extreme
  heat, oil and chemical resistance. Using PTFE and
  Flexible graphite can solve applications like
  aliphalactic aromatic and halogenated
  hydrocarbons, concentrated acids, alkalis, animal
  and vegetable oils.  For more information please
  review our gasket material and cut gasket
  information on http//www.americansealandpacking.c
  om. You will also find more information on
  http//gasketing.net and http//gasketmaterial.net
  /

6
Gaskets and Seals

• The most difficult gasket and seal applications
  are generally high temperature, high pressure or
  both. High temperature is a relative term. In
  rubber materials you are usually referring to
  anything higher than 250 F where common
  elastomers will melt. Viton, FKM, Kalrez,
  Chemrez, and Ameri-rez are the common solutions
  for those applications. If we are discussing
  non-rubber material such as plastics mica,
  thermica or graphite, the solutions are PTFE,
  EPTFE (to 600 F). In the case of graphite if
  oxygen is not present it can handle up to 5,400
  F. Mica is a great solution when oxygen is
  present and over 1000 F.

7
Seals

• Seals that are capable of handling higher
  temperatures must be selected carefully. Other
  factors that affect high temperature capabilities
  include the media being sealed, and the pressure
  you are sealing at. We offer the finest in
  materials and material manufacturers in the
  world. High temperature seals are used in many
  types of machineries and in pipe flanges. These
  can be used to resist liquid and gas.
•  

8
Sheet Gasket Materials

• Sheet gasket materials range from inexpensive
  sheet rubber such as gum rubber, Nitrile, EPDM,
  Neoprene, to the mid cost FKM, Silicone and
  Viton. Non-asbestos materials are also available
  from the inexpensive nitrile based sheets with
  fiberglass or aramid fiber to custom elastomers
  with carbon and graphite. PTFE materials start a
  mid prices virgin PTFE to bidirectional filled
  PTFE such as our new hybrid material, Ameri-lon
  is produced for us by FMI-SPA of Italy. Many
  competing materials are skived causing a week
  tensile strength direction in a sheet gasket
  material. Flexible graphite materials can be
  cheap imports that are high in sulfur and can
  cause pitting to your flanges or they can be high
  grade materials specially made for purity and
  nuclear suitability.

9
Graphite Packing

• Graphite packing is used in high speed and high
  temperature applications. Flexible graphite
  materials are unique in the fact they can be
  shaped and formed repeatedly from tiny broken
  pieces. In these days, it is used in many
  applications with different varieties. It can be
  formed into various shapes. It has lowest Leak
  rates.
• For further details contact on our website.
• Phone no 714-593-9780
• E-Mail Address sales_at_americansealandpacking.com

10
(No Transcript)