Get Cost Effective Split Systems Installation Services From THACS

1
Get Cost Effective Split Systems Installation
Services From THACS
2
The ultimate all-rounder

• Reverse cycle split systems are the ultimate
  targeted solution for just about any room or
  space within the home or office.

3
HOW IT WORKS?

• Whilst split systems can come in many
  different formats, the most common is known as
  the Hi-Wall split system which is comprised of
  the following
• An outdoor condenser unit

4

• An indoor fan coil unit, usually a compact head
  unit mounted up on the wall just below ceiling
  height
• A remote controller which enables the user to
  adjust many options including mode, temperature,
  airflow speed and direction, timers and many more
  features

5

• Split systems work by expansion and contraction
  of the refrigerant gas inside the unit. In simple
  terms, the compressor inside the outdoor
  condensing unit sends the refrigerant gas into
  the head unit via insulated copper piping in a
  hot condition for heating, or a cold condition
  for cooling.
• The fan in the head unit then draws air over the
  coil and delivers the warm or cold air directly
  into the room, quietly and efficiently.

6
WHY A SPLIT SYSTEM?

• Versatility. Our expert installers combined with
  our quality range of split systems are able to
  install a split system into almost any room or
  space in a cost effective manner.
• Range. There are many different variations
  available for the indoor head unit. Hi-wall
  splits are typically the most cost effective,
  however there are many options such as ceiling
  cassette, floor console, under ceiling console,
  concealed bulkhead and more.

7

• Air quality. All of the split systems in our
  range are equipped with advanced filtration
  systems, delivering excellent air quality into
  the home.
• Efficiency. Split systems utilize Inverter
  technology to maximise efficiency, meaning that
  the unit only works as hard as it needs to in
  order to maintain the temperature set by the
  user. Split systems are often more energy
  efficient to run than a gas equivalent.

8

• Additionally, there is no wasting energy heating
  or cooling spaces which are not in use.
• http//tailoredheatingandcooling.com.au/split-s
  ystem-heating-cooling/