EPDM Rubber - A Perfect Roofing Solution

1
EPDM Rubber - A Perfect Roofing Solution
2

• EPDM rubber in roofing systems has been a popular
  choice of flat-roof material for more than 40
  years and is probably the MOST widely used
  roofing solution for low-slope application on
  commercial and residential building. It's a quite
  simplistic yet durable roofing system - a single
  ply-rubber sheet that easily adheres with
  adhesive.

3
EPDM in Rubber Roofing

• Modern EPDM roofing is available in rolls with a
  factory applied adhesive on one side. The factory
  applied tape is laid in to the primed overlap and
  then rolled with a bit of pressure. The resulting
  seam is robust, flawlessly straight, and
  improbable to fail. Because of several benefits,
  EPDM rubber roofing could easily be regarded as
  an ideal solution for RVs, residences, commercial
  buildings and much more. Typically, EPDM roof
  membranes are available in black or white,
  although additional colours such as tan can be
  obtained from a few manufacturers.

EPDM rubber roofing
4
(No Transcript)
5
Understanding EPDM rubber

• Every time the temperature rises or drops down,
  rubber roof moves a bit. However, with regards to
  EPDM Liquid rubber, this will not be an issue.
  The material is made in such a way that it can
  easily stretch out even up to 3 times its usual
  length, making it the perfect solution for
  virtually any building. While it is flexible
  enough to install around pipes, gutter and
  skylights, it will not crack from severe dryness
  and moisture. EPDM allows vapors and heat to
  escape from the building without allowing water,
  heat or any other elements inside.

6
(No Transcript)
7
Benefits of EPDM Rubber in Roofing

• Flexible
• Minimum 50 years Life Span
• Extremely Resistant to Ultra violet, infra-red
  light, negative impacts of weather, chemicals and
  intense industrial pollutants, cold, heat, ozone
  as well as ageing.
• Eco-Friendly
• Energy efficient
• Does not emit any toxic emissions in case of any
  fire

8
(No Transcript)
9
Maintenance

• Even though EPDM rubber roofing does not require
  too much maintenance at all, there are specific
  things you may need to consider when you've one
  such roof structure. For instance, it's
  recommended to check on your roof every 3 months
  as well as clean it, because a lot of debris
  gathering on it could potentially cause damages
  to the roof. When compared to getting it re-laid
  each year, maintaining it once every 3 months is
  obviously a much better option to look at. A
  professional roof installation and maintenance
  company can get all your EPDM roof jobs done
  immediately.

10
(No Transcript)
11
Hire a Professional for Installation

• EPDM roofs are available easily so you might want
  to do the installation by yourself but if you do
  not know what your are doing threre are chances
  that you mess up the whole roof. So, it is
  advisable to hire professional rubber roofing
  contractor who. They can provide you a better
  help in every manner starting from estimation of
  the job to the end of complete installation
  process. South Shore Roofing, Inc. is one such
  roofing contractor of Massachusetts who provides
  rubber roof installation, repair and replacement
  service.

12
Thank You

• For hiring a professional roofing contractor or
  getting estimation for the roofing job
• visit

www.southshoreroofingma.com