know about Rubber Bellow Mechanical Seal

1
All you need to know about Rubber Bellow
Mechanical Seal
2

• Rubber bellow mechanical seal developed with
  rubber bellow are mainly used for water, oils and
  light duties applications. The rubber bellow seal
  is single acting and independent of direction of
  rotation.
• These types of seals have a unique rubber bellow
  as an inferior seal with the self aligning
  features which help in compensating the abnormal
  shaft and run-out to provide long service life.
  The rubber bellows protect the shaft or sleeve
  from fretting.

3
TYPES OF RUBBER BELLOW MECHANICAL SEAL
4

• LPS-141-U
• LPS-141-U series is single coil spring
  unbalanced Mechanical Seal developed with rubber
  bellow for Water, Oils Light duties
  applications. The seal is single acting and
  independent of direction of rotation. 

5

• LPS-001-U LSP-012-U
• LPS-001-U LSP-012-U series are developed with
  RUBBER BELLOW for Water, Oils Light duties
  applications. Rubber Bellow seal is single acting
  and independent of direction of rotation. 

6
RUBBER BELLOW SEALS CHARACTERISTICS

• Rubber bellow mechanical seals are unbalanced,
  single acting with optimum strength and come with
  robustness. Spring design seal are used for
  duel-direction of shaft rotation. Bellow design
  seals are utilized for pressure support and
  elimination of folds. They are independent of
  direction of rotation and torque transmission by
  Elastomer bellow.

7
ADVANTAGES OF
RUBBER BELLOW SEALS

• Low cost as it is produced in large mass around
  the world
• No sliding Elastomer or O-ring. Nothing to hang
  up on the shaft
• Easy to install There are seldom any
  measurements to make or set screws to tighten to
  the shaft.
• Most designs are being sited next to the shaft
  shoulder, or linked to the shoulder cast right
  into the impeller. It is therefore easily pushed
  on to the shoulder
• Availability You can purchase these seals from a
  variety of manufacturers, distributors and
  bearing houses. Distributors have the replacement
  charts that will reference your present seal and
  propose an equivalent design
• No shaft or sleeve fretting When installed
  properly the seal cannot fret or damage a shaft
  or sleeve because there is no relative movement
  between the rubber boot and shaft or sleeve.

8
THE MATERIAL OF CONSTRUCTION GENERALLY OF RUBBER
SEALS COMPRISES OF THE FOLLOWING

• Seal Ring Faces Cabon, SiC and TC
• Seat Faces NiR, Ceramic, SiC and TC
• Elastomer Viton, Neoprene, EPDM, NBR and
  Buna-N
• MOC SS 304 / SS 316

9
APPLICATIONS OF RUBBER BELLOW SEALS

• Sewage applications
• Waste water pumps
• Submersible Pumps
• Fuel injection pumps
• Hot cold-water pumps

10
CONCLUSION

• Rubber Bellow Mechanical Seals are majorly
  utilized in waste water treatment plants for
  different applications. Due to its condensed
  design it can be effortlessly mounted.
• Leak-Pack is one of the top rubber
  bellow mechanical seal manufacturers and
  suppliers of the multiple types of rubber bellow
  seal and rubber bellow mechanical seals, we offer
  the rubber bellow seal manufactured and designed
  of extremely high quality raw materials. For more
  information contact us or call on 7069871592/(2739
  )271592.

11
THANK YOU

• Leak-Pack Engineering (I) Pvt. Ltd.2852/15/1,
  B/H Hotel Patel,Chhapi to Pirojpura
  Road,Chhapi, Ta. Vadgam, Dist.
  Banaskantha,North Gujarat 385210India

• PHONE [phone]
• MOB 91 7069871592
• E-mail  info_at_leakpack.com
• Visitwww.mechanicalsealsindia.in