Benefits & Uses Of Spot Coolers

1
Benefits Uses Of Spot Coolers
2

• So, you have never heard about spot cooling
  before? Then, trust us that you have missed
  something very useful and effective when it comes
  to make a hot place cooler.
• A spot cooler is a sort of portable, standing
  ventilating/air conditioning unit. It is an
  independent framework, which implies its primary
  components, similar to the fan systems, and
  vents, compressor unit, evaporator unit, and
  others are incorporated and installed in one
  completely protected cabinet that is either made
  of metal or plastic.

3

• What is Spot Cooling? We can say that spot
  cooling is the process of cooling a targeted or
  specific space using smaller, compact, and
  portable air conditioning system. Despite the
  fact that anyplace is good for spot cooling, the
  areas that most perfect for this sort of
  ventilation and cooling are usually enclosed
  spaces where comfort must be kept up or where the
  temperature must stay steady and adjusted, for
  example, an industrial area.

4
How Does A Spot Cooler Works?

• The spot cooler works as an air conditioning
  system, and therefore follows the normal air
  conditioning procedure, which is basically the
  expulsion of heat through heat transfer or heat
  exchange, and dehumidification process to expel
  humidity.

5
Check out the way how a spot cooler works

• It absorbs the warm air from inside the area
  through the assistance of the refrigerant. For
  this situation, the refrigerant gets pressurized
  with the assistance of the compressor, and then
  gets evaporated at a low pressure that enables it
  to absorb the warm air.
• Then, the refrigerant gets transformed into a hot
  fluid from a hot gas state.
• The hot refrigerant in fluid travels to the
  condenser where the heat gets depleted and is
  discharged outdoors through the vents of the unit.

6

• Then, the refrigerant, which is currently a
  sub-cooled fluid yet at the same time, stays
  extremely hot, goes to the evaporator. This flow
  of the fluid refrigerant reduces through the
  metering device.
• The fluid refrigerant starts vaporizing when it
  comes to the coils of the evaporator and
  transforms into cool gas.
• Then, this cool air is dispersed in the room,
  industrial area, or any other place through the
  tubes while the hot air is regularly evacuated
  through the vent.
• The process keeps on repeating until the point
  when the set temperature is reached.

7
The Accessories Of A Spot Cooler

• Beside the fundamental internal segments, a spot
  cooler normally comes with these accessories
• Air filter
• Air pipe seat covers
• Screws
• Water tank
• Drain pipe
• Cold air pipe
• Cold air pipe bend
• Hot air exhaust pipe
• Hot air exhaust pipe seat

8

• Remember, spot cooler is quite often used as an
  industrial cooler so there might be a few more
  accessories required and different coolers come
  with various types of accessories.

9
Thank You

• Contact Us - CLIMATE AUSTRALIA PTY LTD 
• Unit 3, 8
  Aquatic Drive
• Frenchs
  Forest NSW 2086
• Email
  climateaustralia_at_bigpond.com
• Website https//climateaustral
  ia.com.au/