What are the steps for PIXMA MG3540 Wireless Connection Setup Guide?

1
What are the steps for PIXMA MG3540 Wireless
Connection Setup Guide?

• Canon Printer Support Helpline Number Ireland
  353-768887727

2
Directions to follow

• If you are looking to make a wireless connection
  on PIXMA MG3540, then follow these steps offered
  by Canon printer support team.

WPS Connection The easy way to connect your
print machine to a network without any password
and to connect your device. Before you move on
with this process, you need to take care of the
following
3

• Access points that should have physical WPS
  button.
• Your network should use WPA (Wi-Fi Protected
  Access) or WPA2 security protocol.

4

• Step 1 first, turn on your print machine and
  then hold Wi-Fi button on the upper section of
  your machine until the alarm lamp blinks once.
• Step 2 just next to lamp there is light flashes
  with blue and run your access point to press WPS
  button within 3 minutes.
• Step 3 this way a print machine is able to make
  a connection successfully, the power and Wi-Fi
  goes to stop flash and remain lit.

5

• Confirmation for network settings You need to
  check that printer is connecting to your wireless
  network

• Check you have turned ON your machine, then load
  an A4 size sheet.
• Next, you have to press its resume or cancel
  button until its alarm lamp flashes for 15 times
  and then release it.

6

• Youll get a network information page printed
  this way easily. Printout check connection refers
  active and SSID is service set identifier that
  refers the right name of your wireless network.
• This process of WPS setup ends here, you need to
  install this software in order to use the PIXMA
  MG3540 printing machine. Either you need a CD or
  you can download its manual and software of PIXMA
  MG3540 printing machine model.

7

• Another method In case, your router is not able
  to make a connection with WPS then a second
  option is to get PIXMA MG3540 connected with
  Standard Connection procedure.

• Step 1 inserts a CD which came with your
  printing device if you wish you can also download
  its manual and software of this machines model
  number PIXMA MG3540.
• Step 2 now screen that comes in front of you,
  you have to press on Next, Mac users need to
  type the password and a helper tool will be
  downloaded by clicking onNext.

8

• For more information, you can connect with an
  expert through contact number Canon
  Ireland 353-768887727.

Also, Read This Blog What Are The Steps To Scan
A Document On A Canon Printer?
9

• Source