How to Carry Out Steel Door Repairs

1
How to Carry Out Steel Door Repairs Steel is one
of the best materials available to you for
durable, long-lasting, easy to maintain,
cost-effective doors in your work environment.
With the amount of tough day-to-day usage that
these doors can go through, there are inevitably
times in which your steel doors will need
repair. Here are a few how tos on doing this
yourself. Dents Dents are a common problem with
steel doors, as steel is a fairly malleable
metal. Steel doors are used commonly in places
with a lot of foot traffic, such as hospitals and
schools. Inevitably, some people will treat steel
doors harsher than others, and so dents can
happen. There are steel door repair methods you
can use which are cheap and quick, and will make
your doors look as good as new. Good grade
fillers are available from hardware and garden
stores, and its a simple case of applying this,
sanding the area down and painting over
it. However, the best advice is to mix the filler
with some water, and apply it in even layers
until its complete. This makes sure that the
filler isnt too heavy, otherwise it may fall
away from the door. You will also need to make
sure that the paint you use matches the original
colour, unless you want to repaint the entire
door. Holes If the dent goes through to the
other side of the steel, this wont be a repair
that you can do. The first thing you would need
to do is make the metal safe, by getting rid of
sharp edges. You can then patch the hole with a
spare piece of steel - preferably by welding it.
Steel is the best material to use, as it is so
pliable and economical. Be sure to do this if you
are sure of the regulations at the place where
the doors sit, and are confident to do this steel
door repair work yourself. Hinges Hinges can
warp and lose their stability. So long as the
door itself hasnt been twisted out of frame, you
can replace the hinges themselves, or weld hinge
reinforcements back into the hinges, as these can
break under enough force. All you will need to do
is remove the door and hinge, drill new welding
holes where the reinforcement is, and fix the
reinforcement back with a quick weld. You will
just need to tidy this up by sanding it and
repainting, then the door can rehang. This is a
common problem in places where steel doors are
regularly placed under excess strain. There are
occasions in which it may not be as simple to
conduct steel door repairs yourself, such as
twisting of the doors integrity so that it is
out of shape in its frame. Rust can also be a
very damaging factor for steel doors, and its
impossible to justify keeping a door that has
rusted. In this case, it would be more advisable
to replace this door with a galvanised steel
door, or paint it yourself with zinc.
2
Steel door repairs can be difficult to do
yourself, but hopefully this guide helps with the
few occasions where it is possible. Article
Source http//www.mmmpoolservice.com/carry-steel-
door-repairs.html