How to Troubleshoot Windows 10 Upgrade Errors?

1
How to Troubleshoot Windows 10 Upgrade Errors?
2
Down level phase

• This phase runs on the source OS, due to which
  upgrade does not usually appear. If you encounter
  an error, make sure that the source OS is stable.
  Also, make sure that the Windows setup source and
  the destination drive are available.

3
Safe OS phase

• Errors most commonly occur during this phase due
  to hardware issues, firmware issues, or
  non-Microsoft disk encryption software. Since the
  computer is booted into Windows PE during the
  Safe OS phase, a useful troubleshooting technique
  is to boot into Windows PE using installation
  media.

4
First boot phase

• Boot failures in this phase are relatively rare,
  and almost exclusively caused by device drivers.
  Disconnect all peripheral devices except for the
  mouse, keyboard, and display. Obtain and install
  updated device drivers, then retry the upgrade.

5
Second boot phase

• Here the system is running under the targeted OS
  with new drivers. Failure of the boot process is
  the most common error appears due to anti-virus
  software or filter drivers. You need to
  disconnect all peripheral devices except for the
  mouse, keyboard, and display

6
(No Transcript)
7
Contact us

• Windows 10
• Technical Support Number
• 1-800-439-2178
• Toll-free
• http//windows-10.technicalsupportservicesinc.
  com

8
(No Transcript)