Work flow of sand making machine

1

• Work flow of sand making machine

http//www.shaktimining.com/sand-making-machine/
2
Introduction

• sand does not occur naturally and the sand which
  occurs naturally is not used in construction.
  There are various types of sand making machine
  and sand screening machine manufacturers in the
  industry. A Sand Making machine is as the name
  suggests the machine which is used for making
  sand. The sand is the output that is produced
  after processing the raw material.

3
The workflow of a sand making machine

• The input to the machine is done.
• The material fed passes through the vibrating
  feeder.
• From vibrating feeder, the material in process
  moves to the jaw crusher. The jaw crusher further
  processes the material.
• From the jaw crusher, the material further goes
  to the impact crusher.
• Further the semi processed material passes to the
  vibrating screen. Here the screening happens and
  the raw material is thus releases.

4
The machine technicalities

• The machine consists of the feeding hopper, a
  rotopactor, motors, and shafts.
• When the input is taken from the stone crusher,
  as the grit, the cost of the sand obtained is
  very low.
• The most Economical ratio of the rotopactor is
  14. It means that if the size of the sand to be
  obtained is 4 mm, the size of the rotopactor
  should be minus 16mm.
• A sand screening machine is used to screen the
  sand and make sure that the sand obtained is of a
  particular grade. The sand is graded according to
  the size of the obtained material.

5
Contact Us

• Address Shakti Mining Equipment Private
  Limited, W-140(A) to 143(A), MIDC Industrial
  Area, Ambad, Nashik - 422 010, Maharashtra,
  India.
• Phone [phone]
• Fax [phone]
• Email sales_at_shaktimining.com /
  info_at_shaktimining.com