How to Resolve the Brother Printer Error 46?

1
How to Resolve the Brother Printer Error 46

• Printer Customer Support
• 
  1-844-867-9017(US/Canada)

2
Procedure to resolve the Brother Printer Error
46

• Close down your printer first and after that
  disconnect it from the power plug.
• Now, press the Menu or Begin button, try to
  hold both on the same time and keeping in mind
  that doing to connect the printer to a power plug
  to switch it on. This will start the Maintenance
  mode on your Brother printer. See at your printer
  screen which will flash Maintenance mode or for
  this situation just error 46.
• Now, to resolve this issue or error, we have to
  set the Absorber pad counter to zero which
  because of some technical issue indicates full,
  causing the error 46.
• Now, for the printers with physical number pad,
  just write 80 to start the procedure and use the
  arrow keys to indicate the alternatives from the
  menu screen. Look down to the point when you run
  over Cleanse among with a number on the screen.
• Now, enter 2783 and look at the screen the
  number before Cleanse will be set to zero after
  this. Now, go back to the menu or just close the
  settings.
• Press 99 to leave the menu and restart the
  printer to give it a chance to check the changes
  on your printer. Once that is completed recheck
  to ensure the issue is resolved.
• Printer Customer Support
• 
  
  

3

• We hope, after following the all above steps
  you have successfully resolved your error from
  your printer. In case, if you got any trouble in
  following this procedure, then you can call
  immediately to Brother Customer Support to take a
  help. 
• Printer Customer Support

4
For Further Details Contact

• US/Canada1844-867-9017
• UK  020-3965-1550
• support_at_printer-customer-support.com
• https//www.printer-customer-support.com