Propane Gas – Benefits for Using Propane for Forklifts! PowerPoint PPT Presentation

presentation player overlay
About This Presentation
Transcript and Presenter's Notes

Title: Propane Gas – Benefits for Using Propane for Forklifts!


1
  • Propane Gas Benefits for Using Propane for
    Forklifts!
  • Diesel and gasoline may be popular fuels for
    vehicles, but they may not be the safest and
    most cost-efficient option for running forklifts.
    In that case, there is propane for forklifts,
    and this can be a better option than electric
    forklifts. Around 600,000 forklifts in the US
    warehouses are powered by propane, and for many
    good reasons. Here are some of them
  • Minimal emissions Propane for forklifts produce
    minimal carbon emissions compared to vehicles
    that run on gasoline. Otherwise known as LPG,
    propane is a clean and approved fuel that is
    listed in the Energy Policy Act of 1992 and the
    1990 Clean Air Act as a clean-burning fossil
    fuel. The US Environmental Protection Agency
    tested the fuel and found that vehicles running
    on propane produce 30 to 90 percent less carbon
    monoxide and approximately 50 percent less
    toxins and other smog-causing emissions than
    those running on gasoline.
  • Safer for workers Carbon monoxide poisoning can
    be fatal, and it can occur when emissions are
    trapped in an enclosed space. Propane for
    forklifts is nontoxic and it will not harm water
    or soil. Moreover, it may help reduce the
    incidents of carbon monoxide poisoning, too.
    Propane forklifts are manufactured to meet the
    strictest national safety specifications and
    they come with an automatic shut-off mechanism in
    case of an accident. This way, the flow of LPG
    is halted before it can endanger workers or the
    facility.
  • Save time, increase productivity Propane for
    forklifts is supplied to the vehicle via
    cylinders, which are easy to replace and safe to
    refill compared to natural gas tanks. In most
    cases, a cylinder can power a forklift for up to
    eight hours, which is lengthy enough for an
    entire shift. You can simply switch to a new
    cylinder for a new shift. And in case of a power
    outage, you do not have to worry about a
    forklift running low on batteries.
  • Cost-effective A study was done in 2005 to
    analyze the costs of running a forklift on
    propane and compared it with that of electric
    forklifts. It was found that running costs are
    lower than electric forklifts by a few cents, and
    while that seems minimal, it can be greater when
    you apply that to an entire year of using
    multiple forklifts in your business.
Write a Comment
User Comments (0)
About PowerShow.com