VxRail Appliance 4.x E22-285 dumps free

1
EMC E22-285

• VxRail Appliance 4.x Deployment and
  Implementation Exam

https//www.passcert.com/E22-285.html
2

• E22-285 Sample Questions From Real Test

Back to school
https//www.passcert.com/E22-285.html
3

• 1. Which user provided block of IP addresses to
  the VxRail initialization wizard may contain
  non-contiguous addresses?
• A. VMware Virtual SAN
• B. ESXi host
• C. vSphere vMotion
• D. NTP Servers
• Answer D

https//www.passcert.com/E22-285.html
4

• 2. A company wants to deploy VxRail on V Series
  nodes as a proof-of-concept (POC). Only one Top
  of Rack (ToR) switch has been provided for the
  POC.
• What is the Dell EMC best practice recommendation
  in this situation?
• A. Connect the first host NIC to the ToR switch.
  Leave the second host NIC un-cabled.
• B. Connect each host NIC to a port on a different
  switch packet buffer bank on the ToRswitch.
  Balance the ports across two packet buffer banks.
• C. Inform the company that the POC cannot proceed
  without a second ToR switch.
• D. Connect the first host NIC to the TOR switch.
  Daisy chain the second NIC between hosts.
• Answer B

https//www.passcert.com/E22-285.html
5

• 3. When preparing for a VxRail deployment, which
  components require forward and reserve DNS
  records?
• A. ESXi hosts, vRealize Log Insight, and Platform
  Services Controller
• B. Platform Services Controller. vCenter, and
  ESRS/VE
• C. ESXi hosts, vCenter, and vRealize Operations
• D. ESXi Hosts, vCenter, and ESRS/VE
• Answer A

https//www.passcert.com/E22-285.html
6

• 4. What is the correct command to restart the
  Loudmouth process on a VxRail node?
• A. /usr/lib/vmware-loudmouth/bin/loudmouthc
  restart
• B. systemctl restart vmware-loudmouth
• C. /etc/init.d/loudmouth restart
• D. /sbin/service loudmouth restart
• Answer B

https//www.passcert.com/E22-285.html
7

• 5. When adding a VxRail node the validation
  fails.
• What could be the cause of this problem?
• A. IPv6 multicasting is not enabled
• B. Only one network interface online
• C. Time on the node was not set correctly
• D. DNS record was not created
• Answer B

https//www.passcert.com/E22-285.html
8

• 6. You are asked to cable up a VxRail G Series
  cluster to a redundant pair of 1/10G switches.
• What is the cabling best practice for this
  configuration?
• A. Cable ports 1 and 2 to oneswitch. Cable ports
  3 and 4 to the other switch.
• B. Cable ports 1 and 2 to one switch. Cable ports
  3 and 4 to the other switch. Cable BMC from node
  1 and 2 to one switch. Cable BMC from node 3 and
  4 to the other switch.
• C. Cable ports 1 and 3 to one switch. Cable ports
  2 and 4 to the other switch.
• D. Cable ports 1 and 3 to one switch. Cable ports
  2 and 4 to the other switch. Cable BMC from node
  1 and 3 to one switch. Cable BMC from node 2 and
  4 to the other switch.
• Answer D

https//www.passcert.com/E22-285.html
9

• 7. A company is in the process of configuring
  their Top of Rack (ToR) switches as a single rack
  that replicates to a secondary data center with
  vSphere Replication.
• What is a consideration for this configuration?
• A. IPv6 and IPv4 multi-cast should be layer-3
  routed between data centers
• B. IPv6 and IPv4 multi-cast should span the
  entire network in each data center
• C. IPv6 and IPv4 multi-cast traffic does not need
  to leave the ToR switches
• D. IPv6 and IPv4 multi-cast traffic should span
  layer-2 between data centers
• Answer B

https//www.passcert.com/E22-285.html
10

• 8. In a VxRail external vCenter deployment, which
  component(s) are automatically licensed?
• A. vCenter only
• B. vCenter and vSAN
• C. None
• D. vSAN only
• Answer B

https//www.passcert.com/E22-285.html
11

• 9. When using vSphere Web Client, what is the
  source of information that can help validate good
  VxRail system post-deployment status?
• A. MARVIN-Virtual-SAN-Cluster gt Monitor gt Health
  Logical View
• B. MARVIN-Virtual-SAN-Cluster gt Monitor gt Virtual
  SAN gt Health
• C. Last Heartbeat, Last Configuration Sent,
  Network Environment Settings, Cluster Monitor
• D. System Diagnostic, Events, Health Logical
  View, Health Physical View, Log Bundle
• Answer D

https//www.passcert.com/E22-285.html
12

• 10. A planned VxRail deployment will use an
  External vCenter Server and syslog server.
• Which ping connectivity tests should succeed and
  which should fail before the deployment?
• A. Succeed ESXi hosts and syslogFail VxRail
  Manager and vCenter
• B. Succeed VxRail Manager and ESXi hostsFail
  vCenter and syslog server
• C. Succeed vCenter and syslog serverFail VxRail
  Manager and ESXi hosts
• D. Succeed VxRail Manager and syslogFail
  vCenter and ESXi hosts
• Answer A

https//www.passcert.com/E22-285.html
13
PPT????www.1ppt.com/moban/
??PPT??www.1ppt.com/hangye/ ??PPT??www.1ppt.com
/jieri/ PPT????www.1ppt.com/sucai/ PPT?
???www.1ppt.com/beijing/ PPT????www.1ppt.co
m/tubiao/ ??PPT??www.1ppt.com/xiazai/
PPT?? www.1ppt.com/powerpoint/ Word??
www.1ppt.com/word/
Excel??www.1ppt.com/excel/ ????www.1ppt.com/zi
liao/ PPT????www.1ppt.com/kejian/
????www.1ppt.com/fanwen/
????www.1ppt.com/shiti/ ????www.1ppt.com/jiaoa
n/
https//www.passcert.com/E22-285.html