sprayon bed liners

1
How to install truck bed liner

• If you think of buying a truck for commercial
  purposes, you know that for sure you want to use
  it for a long term. With the biggest projects in
  the future you want your truck are the best. The
  truck will be your friend to help you in almost
  heavy duty work. One thing that you normally
  don't care is the benefit that you may get when
  you install the bed of the truck lined. If when
  you buy the truck, you have no choice to get the
  truck bed lined from the dealer then you can
  think about it. It is easy for you to apply a
  truck bed liner for your truck when you change
  your mind. Click this website.
• In order to protect your truck bed, you may
  consider some steps. It is obvious that your
  truck bed can be protected after a few minute
  changed. Also, you can save your own money when
  you can apply a bed liner for your truck by
  yourself.
• You should use water and soap to wash your truck
  bed. You need to clean off any dust that might
  cause problem with the truck bed. You can use a
  sponge mop to make it quicker. Next, you need to
  scuff sand the bed. This step will allow the
  rubber and the epoxy mix to adhere to the truck
  bed liner a rough surface for them to stick to.
  When you finish step 2, you should remove all tar
  and wax. You can use a special chemical that is
  often used to remove all wax and tar. This step
  will make sure that no further damage may occurs
  after the liner is installed.
• Most kits include an activator and a base. You
  can use an electric paint mixer or a paint stick
  to mix the 15 minutes before you apply the
  surface. The last step is to apply two coats to
  the surface. The first one should be dry for 30
  minutes before you apply the second one. You have
  to wait until the truck liner dry before using it.