torgeservice

1
TORG E
?TORG Engineering History was started by Roland
Noell and Randy Illg in April of 2016. The idea
for this venture began several years earlier when
Roland and Randy began discussing how
Framecrafters.
2
ABOUT US
TORG Engineering History
TORG Engineering was started by Roland Noell and
Randy Illg in April of 2016. The idea for this
venture began several years earlier when Roland
and Randy began discussing how Framecrafters,
(FC, www.framecrafters.net) a business owned and
operated by Randy and his son Karsten, could be
augmented by the addition of technology and
equipment.
In the fall of 2015 it was generally agreed that
Roland would help finance the upgrade to CAD
technology and Randy would provide the physical
plant and day to day oversight.
In January of 2016 a 2007 AccuraHydrojet(table 6
x 10) was located, inspected and an offer made.
The sale was finalized in February. The machine
was delivered in early April and installation,
testing and training completed by mid-May.
A separate company was established in May 0f
2016 to operate and manage the water jet. The
name TORG Engineering reflects the two principal
individuals, Roland and Randy.
3
In March of 2017 the cutting head was upgraded
to a pre-aligned diamond orifice with carbide
focusing tube. These KMT parts reduced cut taper
to a minimum, reduced kerf and improved speed of
cut. Additional work was also done to the cutting
head alignment management system which greatly
improved accuracy of cut.
It is our desire to provide a good service at a
reasonable cost to our customers. We are able to
provide water jet cutting service as well as
after cut secondary operations including
machining and welding. CAD and engineering
services are also available to help with
producing the best parts for our customers.
4

Our services
Well cut a variety of materials, list below.
Aluminium (all types) Brass Bronze
Ceramic Copper Foam Formica
Granite Leather Marble
Nylon Plastic(all types) Rubber
Stainless Steel(all types) Steel(all types)
Stone Titanium Wood Zinc
Our Abrasive water jet machine precision CNC
Cuts with
No heat affected Zone(HAZ) Virtually no
clean up Accuracy to 0.005"/0.125mm
5

Our Products
(ART WORK)
This is how the original drawing looked as we
received it. Notice the changes compared to the
finished work. Torg Engineering can change the
size from very small and up to the limit of our
machine which is 6 x10 feet (approx. 2 x 3
meters).
6

(Cutch Plate)
The disc engages the clutch hub with the inner
teeth. The fit must be precise in order for the
clutch to work properly.
7

Tools
8

Contact Us
TORG Engineering 17503 Kunde Rd Union IL
60180-9774 USA 1 [phone] randy_at_torg-e.co
m
9

THANK YOU