how to repair laptop screen

1
Complete Guide How to Repair laptop Screen

• Repair My Phone Today

https//repairmyphone.today
2
Getting A Replacement Screen and Tools

• To begin your fix, you'll need a few simple tools
  and a replacement LCD screen. For tools, I
  recommend a screwdriver with a variety of small
  bits, such as a Phillips 00 and a Torx T5. It's
  also a good idea to have a few thin metal blades
  or plastic spudgers. These are really handy for
  removing the trim that surrounds the screen.
• As for the replacement LCD, you should be able to
  buy one either from the laptop manufacturer's
  authorized parts dealer or a third-party
  supplier. Depending the screen, they usually cost
  between 50 and 250 dollarsmore if it's a
  high-end display or you buy an OEM replacement.
  Regardless, you'll want to buy a new screen that
  matches your broken one exactly. The only sure
  way to do this is to remove the broken one.

3
1. Remove the screen bezel

• After disconnecting the power supply and removing
  the battery, carefully examine the bezel around
  the screen. You'll need to remove this bezel to
  access the screws that hold the LCD panel in
  place.
• On this laptop, several rubber cushions hide
  screws, which hold the bezel in place. I'll need
  to remove these cushions and the screws that are
  underneath.
• With the hidden screws removed, I used a thin
  metal blade to pop loose one of the bottom
  corners and worked my way around the bezel with a
  plastic spudger.

4

• Note Your laptop may not have cushions or hidden
  screws. The bezel may simply snap onto the lid or
  be held in place with double-side tape. Just,
  adapt my instructions to fit your specific
  laptop.
• Regardless of how you do it, you'll need to
  completely remove the bezel.
• 2. Remove the broken LCD panel
• With the LCD's mounting brackets exposed, you can
  remove the screws that secure it to the lid. Then
  rest the display front-side-down on the case and
  disconnect its cable.
• If your laptop was made before 2010 and has a LCD
  with fluorescent backlights, it will likely have
  two cables. But as this is an LED-backlit LCD, it
  only has one.

5

• Now, locate the manufacturer's label and note the
  model number. Using this information you should
  be able to buy an exact match for your broken
  screen.
• 3. Install the new LCD panel
• Once your new screen arrives, unpack it and make
  sure it matches the old one.
• If the dimensions, mounting brackets, and
  connector all match, you ready to install the
  screen. Connect the new panel to the cable,
  position the panel in the lid, and secure it
  using the appropriate screws.
• 4. Test the new LCD panel and reinstall the bezel
• Before reattaching the bezel, it's a good idea to
  test the new panel. Reconnect the battery and
  power cable and turn the machine on. If the
  display works, you can reattach the bezel and any
  external screws and rubber cushions. The repair
  is now complete.

6

• As fixes go, this one isn't too tough, but it
  does take a little patience and planning to make
  sure you get the right replacement screen.
• Thanks for Reading
• To know more visit at
• https//repairmyphone.today