Tennis Court Construction & Maintenance - PowerPoint PPT Presentation

About This Presentation
Title:

Tennis Court Construction & Maintenance

Description:

1. Getting Started With Tennis Courts Construction. 2. Common Tennis Court Maintenance Problems & Ways to Resolve It. 3. Different Types Of Surfaces You Will See in Tennis Courts. 4. Tennis Court Resurfacing - The Importance of Guide Specifications. 5. Tennis surface options: clay, grass, or hard courts? – PowerPoint PPT presentation

Number of Views:187

less

Transcript and Presenter's Notes

Title: Tennis Court Construction & Maintenance


1
Tennis Court Construction Maintenance
2
Synopsis
  1. Getting Started With Tennis Courts Construction
  2. Common Tennis Court Maintenance Problems Ways
    to Resolve It
  3. Different Types Of Surfaces You Will See in
    Tennis Courts
  4. Tennis Court Resurfacing - The Importance of
    Guide Specifications
  5. Tennis surface options clay, grass, or hard
    courts?

3
Getting Started With Tennis Courts Construction
  • Tennis courts must be constructed in accordance
    with the stipulated rules guiding its
    construction, and this rule states that the court
    must be 70 feet in length and a width measurement
    of 27 feet. The construction also involves the
    marking of the court to accommodate and clearly
    delineate a players' place either in a single or
    double tennis match.
  • Apart from the fact that strict adherence must be
    followed on the court measurements, other
    necessary inputs are usually made to ensure that
    construction objectives are achieved. These
    inputs are often in the aspect of the nature of
    materials that will be used in the construction
    of the court. For example, when constructing a
    hard court, asphalts and other concrete materials
    are mostly used, while employing layered texture
    inflated rubber coatings to substantially cover
    the surface. This covering ensures that players
    don't get injured during slips and falls and it
    also aids in improving the bounce rates of balls.

4
Common Tennis Court Maintenance Problems Ways
to Resolve It
  • Algae, Mould, and Mildew
  • These pose a serious problem not just to tennis
    courts but buildings in general. However, in
    tennis courts, their impact is extremely
    dangerous to players. Algae, mold, and mildew on
    a tennis court can cause unexpected slipping and
    slide due to the traction of the players shoes.
    Meanwhile, to eliminate algae, mold, and mildew
    on a tennis court you will have to make use of a
    highly effective cleaning solution.
  • Birdbaths
  • Birdbath refers to a puddle of water that is
    found in any area of the tennis court. Birdbaths
    are as a result of incorrect paving during the
    construction of the tennis court.
  • Bubbles
  • Bubbles are also one of the common problems of a
    tennis court. Also known as blisters, there are
    those soft humps that you can see on concrete
    base tennis court surface. Bubbles are caused by
    inadequate surface drainage.
  • Rust Spots
  • Rust spots are found on tennis courts as a result
    of the wetness of pyrites which itself is the
    constituent elements of the asphalt used in the
    construction of tennis courts.

5
Common Tennis Court Maintenance Problems Ways
to Resolve It
  • Depression
  • Depressions are also common problems that are
    associated with tennis courts. Depressions are
    those noticeable low spots on the tennis court
    surface. Depressions are caused by the
    non-compacted underground earth.
  • Hairline Crack
  • These are narrow cracks that are found on the
    tennis court surface. These cracks come up as a
    result of earth tremors, land erosion, quake
    impact, etc.
  • Discoloration of the courts surface.
  • Discoloration of tennis court surface is as a
    result of direct exposure to the sun exposure and
    also due to prolonged use of the court without
    maintenance.
  • Cracking
  • This problem is mostly seen on asphalt and
    concrete base tennis courts. Cracking happens
    when the court gets old and experienced lots of
    foot traffic, it then results in brittle over
    time.

6
Different Types Of Surfaces You Will See in
Tennis Courts
  • Grass courts
  • The grass court is reputed as the tennis court
    with the swiftest flow of play when compared to
    other courts. The surface of the grass court is
    made up of grass grown on very hard-packed soil.
    The rate at which the balls bounce on a grass
    depends heavily on how healthy the grass is, how
    recently it has been mown, and also how much wear
    and tear the court has experience as a result of
    recent plays. Another point to note about the
    grass court is that it has a far greater
    influence on serves when compared to other
    surfaces.
  • Clay Courts
  • The surface of the clay court is made of crushed
    shale, stone, or brick. Renowned for its ability
    to slow down the ball and also produce high ball
    bounces which kills the potency of big serves.

7
Different Types Of Surfaces You Will See in
Tennis Courts
  • Hard courts
  • Hard courts are the most common types of surfaces
    around today. It's very cheap and easy to
    construct. The surface of these courts is made of
    a uniform rigid material, which also has an
    acrylic surface layer thus producing more
    frequent ball bounce than any other court.
    Although the hard court has various degrees of
    speed depending on the quantity of sand that was
    added to the paint during the construction of the
    court. But note that, despite the speed of the
    hard courts, its balls still don't match the
    grass courts which are faster.
  • Carpet Courts
  • Carpet courts are tennis courts with
    artificial/carpet surfaces. These surface are
    mostly found at indoor sports arenas and are put
    in place for the purpose of a tennis game and
    it's pulled off immediately the play is over.
    Tennis games on carpet courts are normally faster
    than the hard courts. It is also characterized by
    low bounce which makes it far more easier for
    tennis players with shrewd serves and a decent
    net game to enjoy the play.

8
Tennis Court Resurfacing - The Importance of
Guide Specifications
  • When giving out a tennis court resurfacing
    contract to a company don't always base your
    decision on the price but rather your choice
    should be defined by the ability of the company
    to meet your resurfacing specifications and
    requirements. If a company can't undertake
    certain resurfacing procedures on your court then
    you should have no business engaging its
    services. These procedures include the following
  • Ensuring the thorough cleaning of the court
    surface with a pressure washer.
  • Tackling depressions on the court surface by
    leveling it to reduce puddles and also repair
    cracks properly.
  • Making sure that voids in the pavement are
    properly filled with the use of a filler coat.
  • Proper application of the required number of
    surfacing coats in line with the manufacturers'
    directives.
  • Ensuring that the coatings are mixed
    appropriately and also make sure that the ideal
    type and required amount of sand and dilution is
    used.
  • Adopting the recommended application method such
    as the squeegee, striping etc.

9
Tennis surface options clay, grass, or hard
courts?
  • Natural grass
  • This is a soft surface with a fast pace and high
    maintenance features. At Wimbledon, you will find
    natural grass courts because of the standard that
    comes with them. Every player has testified to
    the fast speed the court gives to them. After
    all, it is a wonderful experience to play on
    grass. Unfortunately, the natural grass courts in
    Canada are limited because such courts are not
    only hard to build but maintain as well. You can
    compare grass courts to golf courses. Like golf
    courses, they are maintained by weed control,
    fertilizing, and mowing. Thus, you should search
    for a professional tennis court construction
    firms if you want to build a grass court.
  • Clay court
  • Also known as Har-Tru, this court has a soft
    surface with a slow pace but requires high
    maintenance. Unlike others, the ball bounces
    slower. As a result, the game is more controlled
    because of longer rallies and an assortment of
    strokes. If you must play tennis on Har-Tru, you
    need a combined talent of endurance and strategy.
  • Hard Court
  • To obtain a low maintenance hard court, the
    initially hard court can be cushioned and
    doused in an acrylic paint finish. This also adds
    some form of resilience to the surface. This
    rubber version of the hard surface helps to limit
    the risk of an injury that is synonymous with
    hard surfaces. In some systems, a cushioned mat
    is laid on the hard surface (which can be made of
    asphalt or concrete).

10
The End
  • For more details, please visit
  • http//crowall.ca/tennis-courts/
Write a Comment
User Comments (0)
About PowerShow.com