How to Replace Your Vehicle’s Thermostat

1
How to replace your vehicles thermostat
2
Introduction

• If your car is facing a situation where in the
  engine is warming up and cooling slowly, there
  are chances that your vehicles thermostat is
  faulty.
• Overcooled engines lead to increased fuel
  consumption and higher emission levels and the
  engine parts bearing more tear.
• Also, the interior of your car will not heat up
  properly.

3
Steps to replace your vehicles thermostat

• Step 1 Let the engine cool down before working
  on any part of the cooling system.
• Step 2 Carefully remove the hose connected to
  the thermostat.
• Step 3 A significant amount of coolant will
  spurt out of the hose when it is disengaged.

4

• Step 4 Now inspect the positioning of the
  thermostat.
• Step 5 Before removing the thermostat, make sure
  you are thorough with the configuration and how
  it should be attached again.
• Step 6 Now, loosen the bolts manually and remove
  the faulty thermostat.

5

• Step 7 Remove the old gasket and the remnants of
  the old seal from the thermostat.
• Step 8 Clean the mounting surface.
• Step 9 Since you are installing a new
  thermostat, make sure other cooling parts like
  coolant hoses, water pump, and pressure caps are
  in good condition.

6

• Step 10 Put the new thermostat back in
  place. Make sure the copper heat- sensing
  element is facing the coolant flow coming from
  the engine.
• Step 11 Following the manufacturers torque
  specifications, tighten the bolt of the
  thermostat.
• Step12 Re-attach the hose.

7
In case you are in need of any sort of spare
parts be it body, clutch, break, electrical,
engine, propeller shaft or suspension, visit BP
Auto Spares India, largest Mahindra Spare Parts
dealer. Website www.bpautosparesindia.com/mahind
ra-spare-parts Support Email
info_at_bpimpex.in Contact No. 91-11- 23824308