How To Make Use Of Fentanyl Strips

1
How To Make Use Of Fentanyl Strips
2

• Fentanyl or Fentanyl analogs are very strong
  opioids, which are 100 times more potent than
  heroin and more.
• These chemicals are mainly responsible for the
  dramatic and sudden increase in drug abuse in the
  whole world.
• These overdoses of Fentanyl have been linked to
  fake and counterfeit pharmaceutical pills like
  painkillers and others.
• These pills supposedly contain Fentanyl, Cocaine,
  heroin and other drugs.

3
What Are Fentanyl Strips Used For

• These test strips are being used as an
  harm-reduction approach by testing the presence
  or absence of Fentanyl or Fentanyl analogs in the
  unregulated supply of the drug.
• These test strips were initially intended to
  check the presence of urine, in urine drug tests.
• However, no Fentanyl strips can detect all the
  Fentanyl analogs. They are capable of detecting
  the most common and dangerous once only.

4
Method Of Using Fentanyl Strip For Checking Your
Sample
5

• Fentanyl strips, as mentioned above, are used to
  detect the presence of this drug in your
  pharmaceutical pills.
• So, the best method to do this is by testing the
  whole sample or tablet or powder to check the
  presence and absence.
• For this procedure, you need to dissolve the
  sample to be tested in water first.
• The sample will remain consumable, with or
  without water.

6
You can consume the whole solution or wait for
the water to evaporate.

• To carry out the procedure, place your sample in
  a shallow glass. Make sure you powder the tablet
  or crystal if that has to be tested.
• Add the required amount of clean, preferably
  distilled water, to dissolve the contents in the
  glass.
• Use a clean spoon to stir the contents and
  dissolve them.

7

• Once the contents are dissolved, the solution is
  ready to be tested.
• Now take your Fentanyl strips, holding the blue
  side of the strip, insert the other end into the
  glass. You will be able to see a blue line marked
  on the strip, make sure you enter it in the
  liquid only till there.
• Slowly, the strip will absorb the liquid, and it
  will automatically travel up to the test area,
  which may take about 15 seconds to happen.
• Once done, take out the strip and place it on a
  flat surface. Now, wait for at least two minutes
  for it to be able to show the results.

8
Interpreting the Results on Fentanyl Strips

• You have to wait for 2 to 3 minutes for the
  results to show up. Here is what it means
• If there appears one red line on the top, it says
  the test is positive, and there is Fentanyl or
  its analog present.
• If there appear two red lines, that means the
  test is negative, and Fentanyl is absent.

9
If there are no lines or one bottom red line,
that indicates that the test is invalid and you
will have to conduct it once again.
10
WEBSITE

• https//12panelnow.com/
• thestaff_at_12panelnow.com
• 888-936-6627