Know the Procedure for Changing Coolant in the Radiator - PowerPoint PPT Presentation

About This Presentation
Title:

Know the Procedure for Changing Coolant in the Radiator

Description:

The coolant is one of the most essential fluid in your car as it prevents the engine from getting overheated. The coolant is stored in the radiator and circulates throughout the engine to absorb the heat from the engine. However, the coolant needs to be replaced from time-to-time to maintain its efficiency. This is a very simple process and you must know about it. Go through the to know the procedure for changing the coolant in the radiator. – PowerPoint PPT presentation

Number of Views:41
Slides: 26
Provided by: glenwoodforeigncar
Category: Other

less

Transcript and Presenter's Notes

Title: Know the Procedure for Changing Coolant in the Radiator


1
Know the procedure for changing Coolant in the
Radiator
2
Most people invest time and money in car
maintenance, which includes changing the oil,
rotating the tires, and replenishing the fluids,
neglecting preventive maintenance.
3
The radiator maintenance is one of the preventive
maintenance schedules of your car, which helps to
avoid a costly repair down the road.
4
Know the importance of a radiator
5
The radiator plays an important role in the
cooling system of your engine as it keeps the
temperature of your engine regulated, preventing
it from overheating.
6
Irrespective of the brand, in every car, the
coolant inside the radiator plays an extremely
important role in regulating high temperatures.
7
So, to have a prolonged life of your engine
without any serious damage, you should regularly
change the coolant.
8
The procedure to change the coolant
9
It is not required to go to an auto repair shop
and pay a costly fee as you can easily change the
coolant by following the below steps.
10
Prepare the coolant
11
First, refer to your car manual to know the type
and amount of coolant required and then place a
bucket underneath the radiator to collect the old
coolant.
12
To be safe, it is better to disconnect the
battery and make sure that the car has already
cooled down before you start the process.
13
Drain the radiator
14
Find the radiators drain valve, which is mostly
located at the back of the cars grill, before
the engine bay and then, open the valve to drain
the coolant.
15
After that, close the valve to ensure that the
new coolant wont leak and properly dispose of
the radiator fluid as it is a hazardous type of
waste.
16
Empty the radiator
17
Fill the radiator with a water to ensure that it
does not have any residual coolant and then start
the engine for at least ten minutes.
18
When you start to notice that its overheating,
turn off the engine and be cautious that your car
has already cooled down before you drain the
remaining radiator fluid.
19
Replace the coolant
20
When you feel that the radiator and engine have
cooled down, slowly pour the new coolant into the
radiator.
21
Ensure that you properly fill up the radiator,
which you can check by turning the heat up for
ten minutes and notice the gauge staying within
the normal level.
22
Remember
23
The appropriate time for the change of coolant
in the radiator depends on the type of car and
your driving conditions.
24
Therefore, it is advisable to frequently check
the level and quality of the coolant in order to
avoid any major damage to the engine of your car.
25
https//glenwoodforeigncar.com/
https//www.facebook.com/gwforeigncar/
Thank You!
Write a Comment
User Comments (0)
About PowerShow.com