Way to Adjust the Windshield Washer Nozzles of your Car - PowerPoint PPT Presentation

About This Presentation
Title:

Way to Adjust the Windshield Washer Nozzles of your Car

Description:

The windshield washer nozzles are important for keeping your front glass clean and transparent. So, it is needed to test the spray pattern, use a needle to adjust the nozzles and also check the washer spray. You may go through the mentioned s to know the different ways to adjust the windshield washer nozzles of your car. – PowerPoint PPT presentation

Number of Views:12
Slides: 23
Provided by: munichwest
Category: Other

less

Transcript and Presenter's Notes

Title: Way to Adjust the Windshield Washer Nozzles of your Car


1
Way to adjust the WINDSHIELD WASHER NOZZLES of
your car
2
The windshield washer nozzle seems to be an
important safety feature of your car which cleans
the windshield by spraying the water.
3
The windshield washer nozzles of your car need to
be adjusted when they unable to spray the washer
fluid over the car.
4
After using it many times, the windshield washer
nozzles may fail or stop working and need
adjustments to restore its proper spray pattern.
5
The below procedures helps you to adjust the
windshield washer nozzle of your car
significantly.
6
Test the windshield washer spray pattern
7
First you have to test the functions of the
windshield washer system for checking the units
of sprays washer fluid.
8
If the washer does not spray, then note the
spray pattern from the outside of the car by
confirming the nozzle spray fluid.
9
Locate the washer nozzle spray pattern
10
Next you have to locate the sprayer nozzle which
is generally placed on top of the hood near the
windshield of a car.
11
In most of the cars, the sprayer nozzle may be
located under the edge of the hood by the
windshield itself.
12
Use a needle to adjust the nozzles
13
By taking a closure look at the nozzle, you will
found two holes located on the nozzle body in
which the washer fluid sprays out.
14
Then use a needle to insert the fluid into the
nozzle hole. With the needle, gently maneuver the
nozzle to the direction in which it needs
adjustment.
15
Check the washer spray
16
After that spray the windshield washers again.
So, you have to check the spray and keep in mind
that it hit the windshield at the right position.
17
Then, at last, you have to adjust the wash nozzle
several times to get your desired result and
adjust it to its proper position.
18
Conclusion
19
Adjusting the windshield of the washer nozzles
can be a simple process to restore the washer
functions.
20
If you are performing the process at a regular
interval then try to avoid the making of a mess
all over the car whenever you are using the
windshield washer jets.
21
If you find any types of problem with the
windshield washer of your car, then inspect the
washer system and diagnose the problem by a
trained professional.
22
http//www.munichwest.com/
https//plus.google.com/MunichWestDecatur https
//www.facebook.com/Munich-West-195963260464904/ h
ttps//twitter.com/aut0_repair
Write a Comment
User Comments (0)
About PowerShow.com