Picking the Right Roof Panels

1
Picking the Right Roof Panels Whether youre
looking for prefab garages in Alberta or metal
building kits in North Carolina, you need to make
sure your metal building has the proper roof
panels for your purposes. The roof is arguably
the most important part of any building, and
steel buildings are no different. While steel is
naturally more resilient than its more
traditional counterparts, you still have a few
options to protect your roof.
Roof panels come in a variety of shapes and
sizes, and you need to make sure youre getting
the ones most appropriate for your needs. Thats
why weve put together this comprehensive
overview of all the roof panel details and
options you need to consider before you buy.
Learn all about picking the right roof panels for
your metal building.
2
Structural and Architectural A structural roof
and an architectural roof have distinct
differences you need to know, as each is designed
for a unique purpose. Structural roofs have much
thicker panels and dont require any extra
underlayment to install. Heat can travel freely
through the roof, and its functionally
waterproof, even in standing water.
Architectural roofs take a different approach, as
they implement much thinner panels in their
construction. They also have to be supported with
additional materials to keep the whole roof
properly supported and to keep any water out.
They have a higher pitch and are vulnerable to
standing water, but its water shedding capability
is much better than its architectural counterpart.
3
Hydrostatic and Hydrokinetic Hydrostatic and
hydrokinetic roofs generally have the same
distinctions as structural and architectural
roofs, but the difference is caused by the seams
rather than the panels. A hydrostatic roof will
have bigger seams that dont require an
additional deck for support. They are generally
more sturdy and able to support more open framing
setups.
Hydrokinetic roofs, on the other hand, use
smaller seams, generally half the size of their
hydrostatic counterparts. The most important
thing you need to know about this kind of roof is
that its not inherently watertight, so youre
going to need something else to keep water out.
Its important to note, however, that its
water-shedding ability is quite advanced and it
generally comes with a steeper slope. Standing
Seam and Concealed Fastener These roof types both
offer plenty of benefits to enjoy. A standing
seam forces panels adjacent to one another to
bend at a right angle and fold over each other,
creating a waterproof seal. The seam is
reinforced with a sealant, so you can be sure
nothings getting through. The only downside is
that they are really obvious to spot, which can
make some roof designs look a bit jarring.
4
Concealed fasteners eliminate this aesthetic
problem by using hidden clips between the panels,
creating a smooth outer surface. They also allow
the panels ample room to breathe through
temperature changes and dont add any extra
weight on the roof supports. If youre trying to
highlight your roofs appearance, concealed
fasteners are always your best bet. Designing
Your Metal Building Even small steel home kits
can lead to impressive buildings when properly
designed. At Metal Pro Buildings, our engineering
team is happy to work with you to design a
building that works perfectly for your needs.
Contact us for metal building kits in North
Carolina, prefab garages in Alberta or any other
metal building you might need in the United
States or Canada.
5
Source https//metalprobuildings.blogspot.com/201
8/10/picking-right-roof-panels.html