Welding Machine Suppliers in Sharjah, UAE

1

• PLASMA CUTTER PF 45 DU
• The PF 45 DU Plasma Cutter uses the latest IGBT
  Inverter Technology allowing for a compact, light
  weight, portable design. Compact but powerful,
  allowing the user to cut up to 0.8?(20mm) steel
  plate.
• Features
• 45A of cutting power
• High Duty Cycle 100 _at_ 35A, 60 _at_ 35A
• High quality European TRAFIMET Cutting Torch
  included,
• common easy to replace consumables available
  all over North America
• Ability to cut expanded metals and uneven
  surfaces
• Pilot arc (no HF) improves cutting on dirty
  and/or rusted metals
• Automatic shutoff if air pressure is too low or
  disconnected (extends consumable life)
• All re-strike for quick cutting of material with
  gaps
• Internal pressure switch to maintain the machine
  within safe low high pressure parameters
• Internal pressure regulator with built in dirt
  and moisture separator/filter
• Heavy Duty machine protective carry/storage bag
  included with machine package
• Quick disconnect ground clamp assembly allowing
  for easy installation and removal at multiple
  location job sizes
• Accessories (Included)
• Air cooled cutting torch
• Ground clamp with cable 10 ft.
• Machine Bag

2

• PARS CUT SC 131
• PARS CUT(Classic) series is suitable for cutting
  off all metal sheets like aluminum, stainless
  steel, steel up 10mm thickness. High speed and
  quality of cutting with PARSCUT series is a
  response to the Increasing demand of industries.
  A three phase supply and air with pressure 4.7
  5 bar at 180-220 lit/min is sufficient for using
  PARS CUT machines.
• Features
• High speed cutting of all metals such as
  aluminum, stainless steel, galvanized sheet
  steel and alloys, copper, brass up to 40mm
  thickness and so on
• Ignition of arc with HF system
• Very robust construction
• Low gas pressure indicator
• High speed cutting
• Excellent cutting quality
• Easy to operate and handle
• Applicable in all industries
• Protection against overload
• Service and Warranty

• Accessories
• Torch
• Welding cable including earth clip
• Optional Accessories
• Circle cutting tools
• Auto-Darkening Welding Helmet

3
PARS CUT 150T

• THREE PHASE PLASMA CUTTING MACHINE
• TYPE ELECTRONIC (Thruster Controlled)
• PARS CUT 150T is suitable to weld all metals like
  aluminum, stainless steel, steel and cutting
  thickness is max 40mm. High speed and quality of
  cutting with this machine is a response to the
  increasing demand of industry. A three phase
  supply and air with pressure 3 5 bar at 180-220
  lit/min is sufficient for using the machine.
• FEATURES
• Excellent cutting quality due to stable current
• Continuous control of current from 20- 150A
• Stable current and excellent cutting
  characteristic even changing cable length,
  moving the torch, fluctuation of main voltage of
  network and gas pressure
• High speed cutting
• Ability of adjustment of current cutting before
  cutting using digital Ammeter (preset) and real
  current, after starting cutting, without using
  switch
• Auto pilot facility for arc auto start in case
  of any gap in work piece
• Auto HF system in order to increase electrode
  and nozzle life
• Protection of machine and torch in case of
• mistake in inserting insulation of torch
• Protection of machine and torch in case of any
  short circuit
• between electrode and nozzle during cutting
• Protection against overload
• Indicators of low Gas pressure, over load, tired
  nozzle and short circuit between

• OPTIONAL ACCESSORIES
• Automatic torch
• Circle cutting
• Torch carriage
• Control pcb for attaching to CNC machine
• Oil filter
• Auto-Darkening Welding Helmet

electrode and nozzle

• ACCESSORIES
• Manual Torch
• Earth clamp with cable
• Air regulator and filter