ECET 105 Inspiring Innovation--snaptutorial.com

1
ECET 105 Inspiring Innovation--snaptutorial.com
2
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 1 iLab   For more classes
visit www.snaptutorial.com A Control Problem with
Multiple Inputs and Outputs 1.Complete Table 1
below per lab instructions 2.Take a digital photo
of your completed circuit and insert it below. 3.
In a paragraph write your comments on any wiring
issues or challenges that you encountered. How
did you troubleshoot or fix the problem (if any)?
Was there any flickering of the LEDs when the
motor was running or
3
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 2 Chapter 2 Homework   For more
classes visit www.snaptutorial.com Chapter 2
Homework 1)A discrete 120 V ac output module is
to be used to control a 230 V dc solenoid valve.
Draw a diagram showing how this could be
accomplished using an interposing relay. 2)Assume
a thermocouple generates a linear voltage of from
20 mV to 50 mV when the temperature changes from
750F to 1250F. How much voltage will
be generated when the temperature of the
thermocouple is at
4
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 2 iLab   For more classes
visit www.snaptutorial.com 1.Per step 6 of Lab 2
instructions, turn on the power supply and touch
the loose end of the red wire shown in Figure 7
to input terminals X0, X1, X2, X3, X4, X5, X6,
and X7. Indicate which of LEDs marked X0 to X7
will turn on. 1.Explain why some of the input
LEDs do not turn on as you touch the loose red
wire to some of the input terminals of the PLC.
5
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 3 Chapter 4 Homework and Chapter
5   For more classes visit www.snaptutorial.com EC
ET 405 Week 3 Chapter 4 Homework and Chapter 5
6
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 3 iLab   For more classes
visit www.snaptutorial.com 1. Once you have
completed step 6 of lab 3, Print Screen your
ladder logic program that contains your last name
on rung 3 and paste it below. 2. Once you have
completed step 12 of lab3, Print-screen the
ladder logic program you created and paste it
below. Then submit the worksheet to week 3
Dropbox.
7
ECET 105 Inspiring Innovation--snaptutorial.com
  ECET 405 Week 4 Chapter 7 Homework   For more
classes visit www.snaptutorial.com ECET 405 Week
3 Chapter 7 Homework
8
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 4 iLab Hardwiring your PLC   For
more classes visit www.snaptutorial.com Hardwiring
your PLC, Downloading a Program Containing Timer
and Counter Instructions, and Running the
Process 1.Take a digital photo of your circuit
and attach to this worksheet 2. Print a copy of
the ladder logic program from your PC and attach
to this worksheet. 3. Briefly describe the
operation of each rung.
9
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 5 Homework   For more classes
visit www.snaptutorial.com Chapter 10 - PP
298-300   Chapter 11 - PP 318-321   Chapter 13
PP 377-378
10
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 5 iLab Traffic Lights   For more
classes visit www.snaptutorial.com LogixPro
Simulation 1.Copy and paste the ladder logic
program you obtained in step 4 of the lab to this
worksheet. PLC Hardware 2.Take a digital photo
of your PLC wiring and attach to this
worksheet. 3.Print a copy of the ladder logic
program and attach to this worksheet. 4.Briefly
describe the operation of each rung for the
ladder logic shown in step 8.
11
ECET 105 Inspiring Innovation--snaptutorial.com
ECET 405 Week 6 Homework   For more classes
visit www.snaptutorial.com Chapter 14 problems 1,
2, and 7 Chapter 15 problem 2 Chapter 14 Problem
1 Give an example of an open-loop control
system. Explain why the system is open-loop, and
identify the controller and final control
element. Problem 2 Give an example of a
closed-loop control system. Explain
12
ECET 105 Inspiring Innovation--snaptutorial.com