BUS 430 Enthusiastic Study / snaptutorial.com

1
BUS 430 Enthusiastic Study--snaptutorial.com
2
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Chapter 3 quiz For more classes
visit www.snaptutorial.com   1. When Bill
Gates stated that "Microsoft is always two years
away from failure," he was emphasizing the
importance of   2. Value chain measures
would generally be less valuable to   3. In
choosing performance measures, an organization
might consider all of the following criteria
except   4. The service-profit chain model  
3
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Chapter 5 quiz For more classes
visit www.snaptutorial.com   1. Which of
the following is not a major characteristic of a
customer relationship management system
(CRM)?   2. Regarding industrial robots,
which choice is not correct?   3. During
which stage of technology development and
adoption is design and demand flexibility most
critical?   4. Which of the following would
not be included in a typical Customer
Relationship Management System (CRM)?  
4
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 1 set 1 For more classes
visit www.snaptutorial.com   Which one of the
following has the highest goods content? Support
processes would typically include all of the
following except The quality revolution is most
related to Which is generally related to service
operations? The three issues that are at the
core of operations management include all of the
following except A support process could be any
of the following except
5
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 1 For more classes
visit www.snaptutorial.com  
Question 1  Which of the following is not a
current challenge to OM?   Question
2   Which one of the following has the lowest
goods content?   Question 3  
Which one of the following has the highest goods
content?
6
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 2 For more classes
visit www.snaptutorial.com   1. Of the
seven categories of the Malcolm Baldrige National
Quality Award criteria, which is least relevant
to an operations manager?  2. Employee
satisfaction and other workforce-related measures
fall into which perspective in the Balanced
Scorecard?  3. Interlinking is the
quantitative modeling of cause-and-effect
relationships between  4. Productivity is
the  5. Customer satisfaction rating
increases as time-on-hold waiting decreases is an
example of
7
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 3 For more classes
visit www.snaptutorial.com   1. Filing your
individual federal tax returns would best be
described as what type of value chain?  2.
Information technology has significantly affected
health care. Which of the following is not an
outcome?  3. Computer integrated
manufacturing systems result in all of the
following EXCEPT  4. Which of the
following enables engineers to design, analyze,
test, simulate, and manufacture products before
they physically exist?  5. Infinite
scalability is most related to
8
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 5 For more classes
visit www.snaptutorial.com   Question 1  
The production of large goods such as
airplanes is best accomplished using a ____
layout.  Question 2   All of the
following are limitations to process layout
except  Question 3   An assembly
line with 28 operations is to be balanced. The
total amount of time required for all 28
operations is 39 minutes. The longest operation
takes 2.2 minutes and the shortest takes 0.8
minutes. The line will operate for 450 minutes
per day.  
9
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 6 For more classes
visit www.snaptutorial.com   Question 1  
Safety capacity is intended for all of the
following except   Question 2  
Which of the following is a short-term capacity
decision?   Question 3   According
to the Theory of Constraints, ____ is the amount
of money generated per time period through actual
sales.  
10
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 7 For more classes
visit www.snaptutorial.com   1. Inventory
that acts as a buffer between workstations in
flow shops or departments in job shops is called
____ inventory.  2. Backorders ____.  3.
Costs associated with backordering a product are
called ____ costs.  4. Which is not an advantage
of the periodic review system?   5.Using a fixed
quantity system (FQS), as the reorder point
increases
11
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 8 For more classes
visit www.snaptutorial.com   Question 1
  Scheduling refers to
specifying
 
  Question 2  
The time needed to process a given set of
jobs is called
12
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 9 For more classes
visit www.snaptutorial.com   1. GE's Six
Sigma problem solving approach employs five
phases. Which is not one of the phases?   2.
Which of the following is not a part of Philip
Crosby's philosophy of quality?   3. Which
of the following is not directly related to W.
Edwards Deming?   4. Which does not fit
with Six Sigma implementation?
13
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Quiz 10 For more classes
visit www.snaptutorial.com   1. In a Kanban
system, the numerator of the formula K d(p
w)(1 a)/C is analogous to   2. Quick
setup or changeover of tooling and fixtures is
associated with ____.   3. Ford Motor
Company has decided to switch to a pull system of
manufacturing and distribution for its vehicles.
Which one of the following is most likely to
occur?   4. A withdrawal Kanban
14
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 2 Case Study Waldo County For more
classes visit www.snaptutorial.com   Case Study
Waldo County. Please read the case study Waldo
County at the end ofChapter 10 and questions 1
and 2 of that case listed below. Please show your
calculations.   1. What is the project's
NPV, given the projections in the Table
10.8?   2. Conduct a sensitivity analysis
and a scenario analysis of the project. What do
these analyses reveal about   the project's risks
and potential value?  
15
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 3 Quiz 2 For more classes
visit www.snaptutorial.com   BUS 430 Week 3 Quiz
2   Question 1   In regard
to the value chain model, efficiency, cost and
cycle time would be most related to  
Question 2   Of the four models of
organizational performance, which two focus on
the "big picture" of organizational performance
rather than on operational-level framework?
16
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 3 Quiz For more classes
visit www.snaptutorial.com  
Question 1  Which of the following would be an
example of an innovation and learning performance
measure?   Question 2   The triple
bottom line (TBL or 3BL) refers to the
measurement of sustainability in all of the
following areas except  
17
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 4 Assignment 1 LensCrafters Case
Study For more classes visit www.snaptutorial.co
m   Assignment 1 LensCrafters Case Study   Due
Week 4 and worth 250 points This assignment
requires student complete an analysis of the
LensCrafters case from Chapter 6 of the
text.  Write a six to seven (6-7) page paper in
which you  Evaluate LensCrafters operations
strategy and explain how the organization seeks
to gain a competitive advantage in terms of
sustainability.
18
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 5 Quiz 4 For more classes
visit www.snaptutorial.com   Question 1  
In a design specification 25 1.5, the
value 25 is called the ____, while 1.5 is
called the ____.   Question 2  
The final step in using the House of Quality
involves identifying those technical features
that meet any of the following criteria except
19
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 8 Assignment 2 Inventory Management
For more classes visit www.snaptutorial.com   Ass
ignment 2 Inventory Management  Due Week 8 and
worth 300 points  Research two (2) manufacturing
or two (2) service companies that manage
inventory and complete this assignment.  Write a
six to eight (6-8) page paper in which
you  Determine the types of inventories these
companies currently manage and describe their
essential inventory characteristics. Analyze how
each of their goods and service design concepts
are integrated. Evaluate the role their inventory
plays in the companys performance, operational
efficiency, and customer satisfaction.
20
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 9 Quiz 8 For more classes
visit www.snaptutorial.com   1. Johnsons
sequencing rule is used to sequence   2.
Which of the following is an example of a
situation for which a Gantt chart would be
appropriate?   3. Considering a
two-resource sequencing problem,   4. The
Shortest Processing Time (SPT) rule
21
BUS 430 Enthusiastic Study--snaptutorial.com
BUS 430 Week 10 Quiz 9 For more classes
visit www.snaptutorial.com   A tool to help
determine how a process works and what it is
supposed to do is a  2. Root cause analysis uses
all of the following tools and methods except
 3. Six Sigma efforts have use all of the
following concepts and methods except  4. Which
does not fit with Six Sigma implementation?  5.
A tool to help focus on the most significant
problems is  
22
BUS 430 Enthusiastic Study--snaptutorial.com