Title: How could you Determine the Failed Timing Belt of the Car
1How Could you Determine the Failed Timing Belt of
the Car
2The timing belt is made up of strong rubber
material and located in front of the car's
engine. In this way, the lifespan of the timing
belt can be preserved.
3Its human nature to put off small, seemingly
unimportant tasks like a small dent on your
bumper, or maybe the driver side door.
4Thus, the timing belt of the car is moving inside
the motor, so it will work under a lot of stress
and tends to wear out too quickly.
5So, you need to replace the timing belt of the
car on a regular basis. Otherwise, it will cause
lots of expensive damage in your engine.
6 If the timing belt of the car is damaged, then
go through the following points to determine it
easily.
7Engine misfiring
8 The firing rate of the engine can cause an
endangered situation due the worn out timing belt
of the car.
9If the timing belt slip away from the gears and
fall onto the camshaft, then one of its cylinders
is open and close and the engine is misfiring and
need immediate replacement.
10Smoke from engine
11Every cylinder have two holes for letting out the
exhaust and letting them in the air. According to
the cylinder movement and rotation of the
camshaft, the cylinder holes are synchronized.
12 If you see too much smoke coming from the
tailpipe of the exhaust system, then make sure
that the timing belt of the car is failing.
13Engine rough idling
14 The teeth of the timing belt grip the gears for
rotating the engine parts and components. If
these teeth are brittle, then the timing belt
slips away from the gears.
15In this way, the teeth of the timing belt will
fall directly onto the gears and begin to stall
due to the timing of the camshaft.
16Falling oil pressure
17 The timing belt of the car spins the gears of
the camshaft, but when the belt is off, then it
will skip and break the pieces of the camshaft.
18 Few of its pieces may fall into the car's oil
pan and the oil pressure drop in the bottom of
the engine. As a result, it will fail the engine
completely.
19Broken piston or valves
20When the timing belt of the car is failed, then
the crankshaft will end up on its own and unable
to sync with the motion of the camshaft.
21 Due to these issues, the piston can easily
contact the valves when they are opened and bend
the valves as well as damage the pistons.
22Conclusion
23If you want to prevent the engine of your car
from the further damages, then shut off the
engine immediately after you recognize any of the
above issues.
24Then take your car to a reputed mechanic for
replacing the timing belt of your car as soon as
possible.
25http//daseuropeanautohaus.com/
https//twitter.com/DasAutohausTX
https//www.facebook.com/DasEuropeanAutohaus/
https//plus.google.com/111658887596129185930
Thank you!