setroll111

1
Xerox printer problem of phaser 750
CallPC expert
Xerox printer blog
2
Introduction of Xerox

• Xerox is an American organization and they are in
  charge of selling computerized records items and
  administrations everywhere throughout the globe.
• . Its headquarter is arranged in Norwalk
  Connecticut and it was before arranged in
  Stamford, Connecticut.
• Most number of its representatives is from
  Rochester, New York. Around there the
  organization was established.
• . This organization was established on April 18,
  1906. Around then it was a photographic
  organization.

3
Xerox printer problem of phaser 750
Printer not operating

1. See whether that the printer is plugged in and it
   is turned on
2. Interface link is legitimately associated with
   the printer
3. To verify that the controller board is properly
   working, print a help page from front panel.
   There might be a problem with software, driver or
   network setup if the help page is printed
   correctly
4. To verify that the print engine is working
   properly, press the test print button and hold it
   for 3 seconds. This will be done if the help page
   is not printed correctly. A composite gray page
   will be printed if print engine is working
   properly
5. See that your printer can interact

4
If youre using a Macintosh

1. See that there is proper PPD file installed and
   chosen. Select your printer in the chooser, if
   the printer name is not coming in the chooser
   then there might be a problem of faulty network
   connection.
2. In the Finder, you can utilize the Print Window
   order to send a document to the printer without
   utilizing an application. In the event that the
   correspondence connect between your PC and the
   printer is working, the printer creates a catalog
   posting of the dynamic window on the work area.

5
If your using a PC

1. For parallel connection
2. Enter echo show pagegtlpt1(The lpt could likewise
   be a 2 or 3 relying upon the port that your
   printer is associated through)
3. Printer will give a black page if there is a
   disruption of communication link in between
   printer and computer. if this thing happen then
   see whether the appropriate drivers are installed
   and you have correctly chosen the proper printer
4. For TCP/IP Connection enter ping TCP/IP at DOS
   prompt
5. On the off chance that the correspondence
   interface between your PC and the printer is
   associated, the printer discharges a clear page.
   In the event that this happens, yet you can't
   print from your application or through Windows,
   ensure that the suitable driver is introduced and
   that you have chosen the printer effectively.

6
7. If you receive a timeout request, refer to the
TekSMART knowledge base for solutions www2.tek.co
m/TekSMART/ 8. In the Go to a specific document
number field, enter the number 7022 and
click Go. A rundown of answers for settling
TCP/IP issues managing pinging another PC and
timeout issues shows up. Most normal TCP/IP
issues can be settled in the article Verifying
TCP/IP correspondences by pinging. On the off
chance that the correspondence connects between
your PC and the printer is working, the printer
launches a clear page. In the event that this
happens, however you can't print from your
application or through Windows ensure that the
proper driver is introduced and that you have
chosen the printer accurately.