xerox printing problems and how we can resolve it

1

Some common Xerox printer problems and their
solution
Call PC expert
2
Introduction of Xerox

• Xerox is an American company that sell digital
  document service in 160 countries
• Its headquarter is situated in Norwalk,
  Connecticut but it was later shifted to Stamford
• the name of the founder of the company is Joseph
  . William and Chester Wilson
• Printout images of these printers are of high
  quality and they are of affordable price

3
Common printing problem and their solution

• Endless paper chase

• Problem printing taking too long

• Solution High-goals pictures have more
  information for your PC and printer to process,
  which can cause moderate print times. In case
  you're not searching for exhibition quality,
  select draft, the standard or ordinary mode for
  office archives. For introductions or formal
  pieces switch your setting back to high caliber.
  On the off chance that preparing extensive
  records with complex pictures is a piece of your
  ordinary work process, consider adding memory to
  keep your printer murmuring along. Change from
  two-sided to simplex mode. You'll utilize more
  paper yet uneven printing takes impressively less
  time.
• Your driver can decide speed result, as well. Top
  of the line lasers and even some inkjets are
  accessible with a selection of drivers including
  PostScript, PCL or potentially the maker's
  host-based driver. All in all, PCL is best for
  quicker office printing and PostScript is better
  for illustrations concentrated applications and
  ventures.

4

• Workflow logjam

• Problem paper jams

• Solution Youre User Guide or control board
  directions should walk you through this
  effectively enough. Truth be told, some Xerox
  printers give video help and lit insides to make
  jam freedom a snap. Begin by reviewing the paper
  way and expel any stuck material, being mindful
  so as to take out any stuck paper straight or
  more allnot tearing it. In the event that it's
  gotten between rollers, pursue the guide on the
  best way to discharge the weight.
• In the event that it's a misaligned paper that
  caused the jam, evacuate the plate to ensure the
  paper is situated effectively and reseat the
  plate. Some of the time you may discover no
  misled sheet by any stretch of the imagination,
  in which case you'll have to evacuate the paper
  stack, verify whether it's squared appropriately
  and reposition it back in the plateall
  subsequent to taking a full breath.
• When in doubt you ought to dependably ensure the
  sort of paper being printed is upheld by your
  printer. And furthermore make sure to store your
  paper where it's dry to keep away from dampness
  that can make printing troublesome.

5

• A Picture's Worth 1,000 Words

• Problem Really bad looking prints

• Solution Attempt these simple fixes for better
  quality laser printing. On the off chance that
  your issues persevere, the issue is bound to be
  because of provisions or equipment.
• Check your print driver to ensure you have the
  right paper or media chose.
• Twofold watch that the paper stacked in the plate
  coordinates the sort chose in the printer driver.
  
• In some laser printers, the fuser has a
  modification for paper type. On the off chance
  that your printer's fuser can be balanced
  physically, verify that it's set appropriately
  yet know fusers get exceptionally hot so
  practice alert.
• Look at your toner cartridges, imaging unit(s)
  and the fuser for harm. These segments change by
  model and maker so it's ideal to allude to the
  User Guide.
• On the off chance that you have smear marks,
  print a few clear sheets of paper and they will
  in the long run blur away.

6
Thank you