Title: How Panel Beaters Can Help Return The Former Glory Of Your Car?
1H O W P A N E L B E A T E R S C A N
F R U I T M A D N E S S Please join us for a
feast of sweet treats! All our cakes will be on
sale for half the price during this bake sale
event. All proceeds will benefit
stopchildhoodhunger.org B A K E S A L E
H E L P T H E G L O R Y
- R E T U R N F O R M E R
- O F Y O U R
C A R ?
9/413 Dorset Road, Bayswater, VIC 3153
https//www.swaggyspanelshop.com.au/
2- Is your car damaged in an accident or suffered
from vandalism? Dont worry. Panel beaters in
Kilsyth and Lilydale can help return your car to
its former glory. There is a common
misconception amongst the people that panel
beating usually involves hammering your cars
damaged parts with the help of a hammer.
However, panel beating process involves lots
more than restoring the bent out and damaged
spare parts of your car, after an accident. To
give you a detailed insight, we have listed here
the entire panel beating process that can give
your car a nearly new and smooth appearance. - Metal Stretching This is the first and foremost
step of fixing the dent and getting the metal
back into the shape. It has nothing to do with
stretching and pulling. A blow torch is used to
heat the metal of the dented area. Later the
panel beaters will slowly hammer the area with
the help of a shrinking hammer and a dolly. This
will stretch the metal back to shape.
3- Welding This is the next process followed after
metal stretching. This is done when two metal
pieces are needed to be joined together. As
usual, welding is a localised process where
oxyacetylene flame or arc welding is used. - Putty Fillers It is used to fill dents and
small holes on the body. The experienced and
licensedpanel beaters in Kilsyth and Lilydale
will prepare a putty mix and fill it on the hole
quickly and shape it all through. - Panel sanding Once the putty hardens, the next
process for panel beating is sanding. Done
before applying prime, panel sanding ensures
smoothing of the car surface to carry on the
paint job. In this process, both dry sanding and
wet sanding can be used. - Spray paint It is the last step in the entire
panel beating process. Once done to perfection,
the area will be baked in heat to set the paint
and give the surface a glossy effect.
4As it can be seen that the entire panel beating
process is quite complex and requires precision.
Thus, you will need to choose experienced panel
beaters in Lilydale and Kilsyth. If you are
looking for one, Swaggys Panel Shop has to be
your ultimate resort. We have more than 30 years
of experience in the industry and thus ensure to
get you back on the road in the minimum possible
time. Our highly trained and experienced panel
beaters are competent in handling all kinds of
repairs for all the makes and models of the car.
From minor dents to a major crash, we can do it
all. So, when you are in need of panel beaters,
don't hesitate to give us a call on 03 9729 7843.
Not only we'll keep you updated but will also
provide you with the FREE quote.