Why go for waterproofing liquid? - PowerPoint PPT Presentation

About This Presentation
Title:

Why go for waterproofing liquid?

Description:

Solution for waterproofing liquid manufacturers is the best solution for water damage. Here you got the idea about the Way to go for waterproofing liquid? – PowerPoint PPT presentation

Number of Views:59

less

Transcript and Presenter's Notes

Title: Why go for waterproofing liquid?


1
Need and Benefits of Water Proofing Liquid
2
INFORMATION
  • The concept of waterproofing a home is not new.
  • Even ancient civilizations understood that houses
    have to be waterproofed in order to protect them
    from rains and other dampness.
  • A more ancient form of waterproofing dating back
    to the 1800s, combined natural bitumen with
    straw, rag felt, jute, and other materials for a
    waterproofing solution.
  • Today we have different solution like pre-formed
    membranes, liquid applied membranes,
    waterproofing compounds and waterproofing liquid.
  • Waterproofing membranes in liquid form made by
    water proofing liquid manufacturers.
  • These solutions are used before as well as after
    construction. 
  • These are meant to protect the structure form
    dampness, rains, and leaks. It can seriously
    damage the interior and exterior of the
    building. 
  •  

3
NEED FOR WATERPROOFING
  • There are the following reasons for the need for
    waterproofing.
  • Protection from water damage
  • Building regulations
  • Risk prevention
  • Economical in the long run

4
PROTECTION FROM WATER DAMAGE
  • Waterproofing is essential to prevent water
    damage that can occur due to any kind of water
    penetration.
  • This can happen due to rains or leaks.
  • Water leaks will weaken the concrete, damage the
    reinforcing rods in the structure and can even
    affect the cabling. 

5
BUILDING REGULATIONS
  • Local codes may make waterproofing mandatory in
    some building, especially apartments.
  • The codes are established to ensure a safety for
    residents.
  • Hence, building codes make waterproofing
    mandatory to protect the integrity of the
    structure. 

RISK PREVENTION
  • Risk prevention focuses on solutions that reduce
    any risks to the residents of a home.
  • As explained above, water can be very damaging
    to any structure.
  • Waterproofing, hence, gives us a sustained risk
    prevention solution. 

6
ECONOMICAL IN THE LONG RUN
  • Adding waterproofing solutions may seem
    expensive initially. But it is economical in the
    long run.
  • Without waterproofing you will be faced with
    repairs caused by frequent leakages.
  • Together these can become expensive and you may
    have to go for post-construction waterproofing
    anyway, which is also expensive.
  • Adding waterproofing solution in the beginning
    can save you the money and hassle that will come
    your way without it. 

7
WHY GO FOR WATER PROOFING LIQUID?
  • Solutions by water proofing liquid
    manufacturers are often the most effective
    solutions.
  • Apart from waterproofing specific structures, it
    should also be applied to drainage systems so as
    to protect the integrity of the surface. 
  • In a way, we stop leakage at the source. There
    are other benefits offered by waterproofing
    liquids
  • Ease of application
  • Fully bonded
  • Monolithic system
  • Easy on any contour
  • Easily Repairable
  • Weather/Aging

8
EASE OF APPLICATION
  • These liquids are very easy to apply. Any
    builder can do this job for you.
  • In fact, anyone with the minimum skill level can
    mix a waterproofing liquid into the required
    surface material. 
  • This means that you dont have to look for a
    specialist for the job, which also lowers the
    cost of workmanship.
  • However, it should be done properly. So, make
    sure you have a good builder to begin with. 

FULLY BONDED
  • The waterproofing liquid is meant to dissolve in
    the medium. 
  • This means that it bonds fully, incorporating
    seamlessly into the said medium.
  • This makes it highly effective, since the
    waterproofing becomes an integral part of the
    medium. 

9
MONOLITHIC SYSTEM
  • Waterproofing liquid is mixed into the medium,
    such as cement. It then becomes part of that
    medium.
  • When it is laid out, there are then no gaps the
    waterproofing.
  • As a result we have a seamless waterproof
    surface, this means that there are no fissures or
    gaps through which the water can penetrate. 

EASY ON ANY CONTOUR
  • The best part of solutions by water proofing
    liquid manufacturers is that liquid is always
    more amenable to adapt to any surface or floor
    grout.
  • Whether it has contours or is uneven, the liquid
    will flow around it without creating any gaps or
    cracks.
  • This is a huge advantage in construction where
    we use different shapes. We get a seamless
    solution with waterproofing liquid. 

10
EASY REPAIRABLE
  • If there are problems with the waterproofing, it
    can be fixed easily later. 
  • Some liquid membranes are rolled, brushed, or
    sprayed at a later time for repairs. 
  • The membrane will harden and get cured into a
    waterproof surface with time. 

WEATHER / AGING
  • Waterproofing liquids are a long-term solution
    because they can withstand weathering or aging
    well.
  • It does not start to peel off or crack easily,
    which means that the waterproofing solution will
    last for a long time.
  • You will not have to worry about leakages for
    quite some time.
  • Combined with the range of rates offered by
    water proofing liquid manufacturers, we have a
    very economical solution. 

11
CONTACT US
http//powergraceindustries.com
1800 121 0141
care_at_powergraceindustries.com
305, Dev Arc, Opp. Iscon Temple,S.G. Highway,
Ahmedabad.
Write a Comment
User Comments (0)
About PowerShow.com