5 Steps To Installing A High-Velocity HVAC System

1
5 Steps To Installing A High-Velocity HVAC System
Written By Jennifer Smith
Date 4-july-2019
2
Context

• What is HVAC System
• 5 Steps To Installing A High-Velocity HVAC System
  
• Graphics
• Contact Us

3
What is HVAC System

• The initials HVAC stand for Space heating,
  Freshening and Air Preparing. They describe the
  functions of an HVAC system. This mechanical
  systems enterprise is primarily an attempt to
  take control of the conservational conditions
  inside the interplanetary you work.

4
5 Steps To Installing A High-Velocity HVAC System

• Calculate The Load.
• Find A Suitable Location For The Fan Coil Unit
• Construct A Simple Platform
• Connect Supply Tubing And Plenum Duct
• Install Supply Tubing

5

1. Calculate The Load.

• The initial step is to complete a heap
  computation. SpacePak gives a "Kwik Way"
  measuring structure that is intended to precisely
  give a room-by-room load for the high-speed
  framework. Additionally offered is a "Source" CD
  including count programming. The product can be
  downloaded at no expense at www.spacepak.com.
• Since the framework has been appropriately
  estimated for the structure, we can start our
  hardware establishment.

6
2.Find A Suitable Location For The Fan Coil Unit

• The underlying thought is the area of the fan
  loop unit. The fan loop unit might be situated in
  an unconditioned space. Regions, for example, an
  upper room, carport, or creep space are adequate
  as long as the area is shielded from the climate
  and nearby codes are met. The fan loop unit may
  likewise be situated in an adapted space, for
  example, a cellar, storage room, or utility room.
  Two kinds of fan curl design are offered - flat
  and vertical cupboards.

7
3. Construct A Simple Platform

• You can develop a straightforward stage dependent
  on the size of the fan curl unit. (Guidelines for
  this might be found in the establishment manual).
  It is prescribed to utilize 2-by 8-inch stud
  amble and at least 1/2-inch pressed wood for
  stage development. Continuously utilize the gave
  segregation strips under the unit for best
  execution. You can also hire company like QRG AIR
  CONDITIONING

8
5. Install Supply Tubing

• You are presently prepared to introduce the
  supply tubing. (Snappy connectors, plenum
  departures with gaskets, and offsetting holes are
  provided with the establishment unit.) Always
  maintain a strategic distance from sharp twists
  in the supply tubing and attenuator tubing.
  Supply tubing normally comes in 100-foot lengths
  and might be sliced to wanted length. The base
  length is 6 feet and the most extreme is 30 feet
  with attenuator. Slice your supply tubing to the
  best possible length.

9
4. Connect Supply Tubing And Plenum Duct

• When introducing the air circulation parts, it is
  dependably a smart thought to complete a
  framework design dependent on your estimating
  parameters. The plenum conduit might be kept
  running in essentially any area that is available
  for the connection of the supply tubing. (Audit
  recommended formats in the establishment manual).

10
Graphics
11
Contact Us

• Contact Number
  703-466-0072

Email us
info_at_qrgtech.com
Visit us on Quality Furnace Installation
Services