Body Shaping — CoolSculpting Or UltraShape? — Dr. Marwah’s Clinic

1
Want to lose out on those extra fat inches? Then,
you are probably planning on undergoing a fat
reduction treatment. But, with the multiple of
options available, which option would you
choose? If you ask us, instead of surgical
options, we will ask you to undergo a non-
invasive procedure that is safe and equally
effective. CoolSculpting and UltraShape are two
such non-invasive procedures that you must choose
from.
CoolSculpting CoolSculpting is a non-invasive
procedure in which the body is exposed to extreme
cold so as to freeze the fat cells and break
them down into fragments, which can then be
easily eliminated out of the body through
natural processes. It eliminates 24 fat using a
CoolSculpting applicator to freeze the fat
cells. Procedure Controlled cooling is
targeted on the area to be treated to kill only
the fat cells in the area. An applicator is used
with suction to pull enough pinchable fat into
the device so that it can be frozen. After one
session ranging from 35-45 minutes, the
applicator is removed to demonstrate a firm
stick-of-butter like frozen skin block protruding
from the body. The area is then massaged for 2
minutes to help the fat melt back into the body.
As the fat melts, the protrusion vanishes away,
leaving a red area. In the weeks that follow, the
2
body will naturally process the fat and eliminate
the dead fat cells. Because the fat cells are
gone for good, CoolSculpting proves to have
long-term results. UltraShape UltraShape is a
non-invasive procedure where ultrasound
technology is used to destroy fat in three
in-office treatments, where there is no bruising,
no swelling, and no redness involved. It is fast
and can cover larger targeted areas to reduce
fat. It eliminates 32 fat layer reduction using
a painless fat destruction device. Procedure A
series of photos and measurements will be taken
to track the essential information of your
target areas. Pulsed focused ultrasound energy
will then be used to produce a warm mild
tingling sensation on the skin, which will
destroy the fat cells. It will take somewhere
between 30 to 60 minutes to treat an area. You
will start seeing improvements within 10-14 days
of your first treatment session and you could
get back to your normal daily activities almost
immediately after the treatment. You may need
around three sessions of UltraShape treatment
for the best results. Speaking of side effects,
there could be a slight swelling or redness in
the treated area, but it will resolve on its own
within few hours of treatment. There is no effect
in the surrounding nerves and tissues, making
the procedure absolutely safe. Both the
procedures have the same results, with the only
difference being in the way they work. While
CoolSculpting uses a freezing procedure and
targets pinchable fat, UltraShape uses
ultrasound technology to target even the
non-pinchable subcutaneous fat. If you decide on
undergoing any of these procedures, it is always
better to get a consultation first. Approach a
professional who will check your body and skin
thoroughly to help you know whether you are a
good candidate for such procedures or not.
Undergo these procedures only if they are safe
for you. And, the best place where you can have
such body shaping treatment in Mumbai performed
on your body is at Dr. Marwahs Clinic, which is
an expert for both CoolSculpting and
UltraShape. For more information, visit
http//www.drmarwah.com/