Brass Parts: Top-quality of good works to follow for Brass exporters

1
How To Maintain Brass Parts For Longer Life?
2

• Brass is nearly as bright as Gold. Brass is a
  common name for alloys of Copper and Zinc in
  several proportions, along with other elements
  like Lead or Silicon in minor proportions. It
  finds its use in a variety of places that range
  from decorations for its appearance to areas
  requiring low friction. Brass is highly preferred
  by designers in musical instruments for its
  durability and in areas where corrosion is
  troublesome.
• Since it is used profoundly in sensitive areas,
  there is this added need to protect and maintain
  it. Brass parts, especially those subjected to
  high temperature and atmospheric air, are the
  most susceptible ones for withering.
• Brass parts exporters often find it difficult to
  guarantee the longevity of their products as it
  depends upon how well and how precisely it is
  maintained by the consumers. Hence, it becomes
  essential to recommend good practices to be
  followed by the users while warning about things
  to be avoided. Let's have a look.

3
Common Things About Brass

1. Addition of Pb Lead globules usually migrate
   towards the boundaries while casting. Hence, its
   content in brass increases the loss of materials
   during machining, and it particularly happens
   when the concentration of lead is comparatively
   low. In this way, the life of the brass part is
   significantly reduced by the addition of
   insufficient lead.
2. Season Cracking They are susceptible to Stress
   Corrosion Cracking. It means that Brass, being
   reactive to Ammonia, will be attacked chemically
   under high-stress environments. It leads to the
   formation of cracks. This problem can be solved
   by enclosing them in annealed cases relieved of
   residual stresses, especially when it is under
   tight and hot environment.
3. Regulations on Lead Addition Legal regulations
   in some places prohibit any of the Brass alloys
   that don't have Lead to be mixed with Brass
   alloys having Lead. It is a mandatory regulation
   to be followed by Brass parts exporters and
   manufacturers because of the contamination and
   poisoning concerns.

4
Good Practices to Follow

• Top-quality Brass parts exporters do recommend a
  set of good practices to follow so as to expect
  longer life from the brass part. Some of them
  are
• Clean the crevices regularly. They are the places
  where the tarnish and the residue from the
  polishing process accumulates.
• Do not aggressively polish the brass parts with
  abrasive materials. It gives a typical sheen to
  it called "butler's finish'.
• Maintenance process for Brass is purely dependent
  upon the type of sheen and whether the part is
  lacquered or uncoated.
• Before beginning a large scale cleaning process,
  do document, photograph every part along with a
  written description for building archives.

5
Ultrasonic Cleaning Method

• One of the popular methods for cleaning intricate
  Brass parts is by using Ultrasonic waves. Herein,
  the parts are put in a basket submerged into a
  tank consisting of a suitable cleaning solution.
  Then, an appropriate cleaning cycle is decided
  that would get the most out of the process
  without affecting the material. The method is
  preferred for the following reasons
• There is no need for dismantling the part in this
  cleaning method since it is submerged in a
  cleaning solution of very fine particles of size
  lesser than the tolerance between fastening
  arrangements in an assembly.
• The cleaning efficiency is almost a hundred
  percent in this method as the particles in the
  solution are exited into a high energy state and
  high-frequency oscillation so that they reach
  each and every crevice.
• Cleaning cost per piece is drastically lowered by
  this method since multiple parts are subjected to
  the process simultaneously. It saves time and
  money spent on overhead costs.

6

• Manufacturers and Brass parts exporters recommend
  a wide range of standards for the maintenance and
  cleaning of Brass components, which guarantees a
  long life to the product.

7
EVERSHINE APPLIANCES PVT. LTD. Plot No. 41,
Ichhapore GIDC, Opp. ONGC, Near GAIL,
Sachin-Hazira Road, Bhatpore Village, Surat - 394
510 (Guj.) INDIA. CIN U27108GJ2004PTC044421
www.oliveworld.com
91 261 2841532 / 2840008 91 261 2840057 / 58