Premium Connection Casing Pipe and Premium Thread Casing Coupling Manufacturers

1
WRG (Weatherock Groups) provides premium
connections and optimal performance in order to
serve in the tough application surroundings.
Moreover, this service is being widely used by
its customers in South-East, Africa and South
America. This Premium Connection is very
beneficial for the end-user as it can greatly
improve the usage, save cost and increase the
life span. Lastly, it is having 5 further
categories TP-CQ 2-3/8"13-5/8", TP-G2
2-3/8"20", TP-QR 13-3/8"20", PT-Flush
2-3/8"11-3/4", PT-H6 2-3/8"4- 1/2". Premium
Connection Casing Pipe Manufacturers and Premium
Thread Casing Coupling Manufacturers come under
WRG.
TP-CQ 2-3/8"13-5/8 Few points about
TP-CQ Structure Features 1. High-performance
gas-tight premium connection for casting and
tubing, ISO 13679 CALIV approved.
2

• Excellent gas seal-ability under combined load.
• Easy stabbing, No cross-threading.
• Superior Anti-galling performance.
• Easy repairing.
• Suitable for low alloy and carbon steel pipe.
• Modified Buttress Thread
• 1. Taper116.
• 2. TBG 2-3/8"2-7/8" 8T.P.I. 3-1/2"4-1/2"
  6T.P.I.
• 3. CSG Sin13-5/85T.P.I.
• 4. Meta-Metal Seal.
• 5. Seal Taper TBG 11.732 CSG 1.10,1.6,1.3
• 6. Reverse angle torque shoulder
• Threaded Connection
• The thread crests minimize thread galling with
  the clearance at the top and avoid the tapping
  of the compound inside the threads. It improves
  and gives buttress thread with a taper of 116.
• TP-G2 2-3/8"20"

3

• The 4 reverse angle on the load flank which
  provides the connection with superior tensile
  strength and increases its resistance to
  compression with a modified hook thread profile.
• TP-QR 13-3/8"20"
• Few points about TP-QR
• Structure Features
• 3T.P.I. coarse-thread enables fast make-up
  without cross-thread.
• Torque shoulder provides accurate power-tight
  make-up.
• Internal flush.
• Threaded Connection
• High connection strength, fast and easy running
  without cross-threading through the coarse
  thread form with a taper of 112 and a lead of
  3.T.P.I.
• PT-Flush 2-3/8"11-3/4"
• The structure features of PT-Flush

4

1. The external and internal thread is machined
   directly in the pipe without couplings.
2. Joint is used internal and external upset.
3. PT-H6 used a cylindrical thread form, the load
   flame angle is 75, and the stab flank angle is
   20. Thread pitch is 6T.P.I.
4. There is no radial interference between the inner
   and outer thread.
5. Taper metal to metal internal pressure seal is
   rated at 100 of the pipe body and the 100
   external pressure seal is created at the torque
   shoulder.

Link Link to this site is given below for the
in-depth information about the product or the
Company https//weatherockgroup.com/
Source https//medium.com/_at_weatherockgroup/premiu
m-connection-casing- pipe-and-premium-thread-casi
ng-coupling-manufacturers-fb5747cd2f39