Know How to Install Laminate Flooring

1
How to Install Laminate Flooring
2
Laminate Flooring
Most DIYers can install an entire room with
laminate flooring in just a day. Planks can be
cut with a hand saw or circular saw, and most
laminate flooring comes in planks that simply
snap together with a tongue and groove system.
Now, laminate can be installed in every room in
your home since it doesnt have to be glued down.
Likewise, for hardwood floor installation Los
Angeles, you must hire experts so they can offer
the best service. As the experts are skilled and
knowledgeable, they know what to offer and how to
offer so that you get what you have wished for.
3
Prepare The Floor
After removing the existing floor and quarter
round moulding, check that the subfloor is solid,
flat and clean. Fix concrete subfloors with a
patching compounds, and for wood floors, remove
protruding nails and replace the damaged boards.
If you are installing the floor below grade or in
a room with high humidity or moisture, like
bathroom or laundry room, lay down a vapor
barrier before you install the flooring. Just lay
out unopened boxes of laminate planks in the
room. This will allow them acclimate to the
rooms temperature and humidity. They must
acclimate for at least 48 hours.
4
Prepare Door Jambs
It is easier to cut the trim around doorways than
it is to cut the flooring to match the mouldings
irregular shape. Once cut, the flooring will slip
under it, leave a more finished look. If needed,
take a plank of flooring and a section of the
underlayment and lay it finished side down next
to the doors moulding. This will show you how
high up you need to cut the moulding. Trace a
guide line along the surface of the moulding with
a pencil. Finally, use a jamb saw to make the
cut,. You can hire experts to do the needful.
5
Cut The First And Last Rows
Install the floor parallel to the longest wall or
focal point in the room. Measure the width of the
room from the wall and divide the distance by
width of the planks. This will tell you what the
width of the final row of planks must be. Allow
for a 3/8-inch gap along both walls to allow for
expansion of the flooring. If the last row is
going to be less than 31/2 inches wide, consider
distributing the width needed between the first
and last rows. However, dont forget to allow 3/8
inch gaps along both walls.
6
Install The Underlayment
If your laminate product didnt come with an
attached underlayment, roll out two rows of the
underlayment and trim it to size with a utility
knife. The underlayment should meet but not
overlap, as overlaps in the underlayment results
in bumps under the flooring. Duct taping the seam
will hold the underlayment n place and help
maintain the vapor barrier.
7
Install The Rows
All laminate flooring will expand and contract
due to temperature and humidity fluctuations. To
allow for this expansion, place 3/8-inch spacers
along the wall to leave a consistent gap around
the edges of the floor. If the door to the room
is located on one of the shorter walls, start
laying the planks on the door of the room. This
will ensure you have the clean, uncut edge at the
threshold. Begin the first row of flooring by
placing the planks with the tongue side facing
the wall. Install the second plank next to the
first by aligning the tongue into the groove and
press the plank down to snap it in place.
8
Thank You
For Details Visit https//almahdihardwoodflooring
.com/service/laminate-flooring-sherman-oaks/