RFID Bolt Seals | One Time Container Security E-Seal | Manufacturer India

1
ID Tech Solutions pvt ltd
2
RFID Bolt Seals

• RFID Bolt seals provided by ID Tech
  Solutions are highly reliable, durable, and
  efficient enough to resist water and to work
  under high temperature and high-pressure
  environment. These cable seals are heat
  resistant, chemical resistant. These C-TPAT
  compliant cable seals qualify as High Security
  seals and comply with ISO 177122013.

3

• These can only be used once and must be removed
  by Bolt cutters, providing anti-theft protection
  as well as preventing barrier loosening and
  associated damage. They also provides protection
  for containers in transit. These are of steel
  wire/cables in a tough plastic casing.
• This is a High-Security Seal, Univocally
  identifies the container or the vehicle to which
  it is attached. It can be easily and reliably
  read by fixed reading units placed at transit
  gates or by handheld reading units manually
  operated by inspectors and gives back it unique
  code as a basic RFID seal. 
• When compared to standard RFID seals, tamper
  evident RFID Bolt seals are able to permanently
  store into their memory the tamper event by
  activating a status bit named TAG TAMPER ALARM,
  thus providing immediate information about seal
  status at readings (tampered/not tampered)

4

• The thick steel bolt is housed in a tough plastic
  case which is corrosion resistant and
  weatherproof, making this a top choice for
  outdoor use in sealing shipping containers. The
  bolt seals are compatible with many different
  barriers and posts, and each carries its own
  unique reference number for safety audit purposes.

5

• Electrical Characteristics of RFID Bolt Seals
• Conforms to ISO 177122013 (H)
• Air interface Protocol ISO/IEC 18000-6C, EPC
  Class 1 Gen 2
• Technical Specification
• Unique TID 96 bit
• EPC 96 bit
• User Memory 128
• Data retention 50 years
• Write endurance   100,000 cycles
• Read Range up to 10 meter
• Operating Frequency 860-960  MHz
• Operating Mode Passive (Battery Less
  Transponder)

6

• General Characteristics
• Ingress Protection  IP65
• Operating Temperature -30C to 80C
• Storage Temperature -30C to 80C
•  
• Mechanical Characteristics
• Attachment Method Pin
• Length 80mm
• Weight 36.8 gram
• Material Carbon steel galvanization ABS
• Body
• Length 72mm
• Weight 39.7 gram
• Material Carbon steel galvanization ABS

7

• ID Tech Solutions being manufacturer provider,
  seller, and distributor of the wide range of NFC,
  Bluetooth, HF, UHF, RFID handheld reader, and
  RFID tags and cards provide them for clients
  across all industries and across the length and
  breadth of India. 
• We being the RFID products and automation
  solution also provide these readers for inventory
  tracking and management, stock management, warehou
  se management, container management, access
  management, and other customized uses. We have
  our HQ in Gurgaon (Delhi-NCR) India and we are
  providing the same for more than 15 years and
  have a long list of satisfied clients, who have
  benefited from our readers.
•  

8
(No Transcript)