Get phone cases cover at best price

1
Making a Silicone Cell Phone Case

• Placed on plastic gloves and protect your
  surface. Cover your counter with wrapping,
  parchment paper, or paper.
• Try to work in a well-ventilated area. Silicone
  can have a strong odor.
• The silicone utilized in this method isn't an
  equivalent as hot glue.For more
• Phone Cases Online cartloot is the best online
  store for you.
• Measure out your cornstarch and clear silicone.
  Add some cornstarch onto a smooth counter or
  into a glass bowl, then squeeze some clear
  silicone onto it. The measurements do not have
  to be precise you only want to possess more
  cornstarch than silicone. Plan on using about 5
  tablespoons (50 grams) of cornstarch and 2 to 3
  tablespoons (30 to 40 grams) of silicone.
• Make sure that you are using clear silicone. You
  can find it in home improvement stores. It comes
  in a syringe.
• If you can't find cornstarch, look for corn
  flour. You can also use potato starch
  instead.For avoid this Buy Mobile Cases and Cover
  Online from cartloot online store at a very
  affordable price.
• Consider adding some color. You don't have to do
  this, but it a good way to make your phone case
  look more interesting. If you do not do that,
  your phone case will look white. You use a few
  drops of liquid dye, liquid watercolor, food
  coloring, or acrylic paint.
• Bring everything together until the silicone
  turns to dough. You will got to knead it about
  20 times approximately. You won't devour all of
  the cornstarch, which is normal.
• Roll the dough into a flat sheet. Can be done
  with a rolling pin, a glass, a wine bottle, or
  even a spray paint can. Keep rolling until you've
  got a sheet a touch larger than your phone. It
  should be about ? inch (0.32 centimeter) thick.
  Buy Cheap Phone Cases Online from cartloot online
  store at the affordable price.

2

• Hold your phone on top of the sheet. Make sure
  that your screen is facing upwards, and you've
  got equal amounts (or on the brink of it) of
  dough protruding over all sides.
• Wrap the dough over the sides and top of your
  phone. Keep a paint spatula under the dough,
  then lift it up and fold the dough over the edges
  of the phone. Smooth out any creases or
  wrinkles attempt to be as neat as possible.
• Use stamps to indent designs, if desired. Flip
  your phone over and mud it with cornstarch. Use
  a stamp to indent designs into it. You can also
  use cardboard cutouts instead to make your own,
  unique designs. Lift the stamp away when you are
  done. Buy Mobile Cases Online from cartloot
  online store.
• Let the silicone dry before removing it. How long
  this takes depends on the sort of silicone you
  used and therefore the weather. It may take just
  two hours, or it's going to take 24 hours. Once
  it is dry and solid to the touch (you can't dent
  it), pull it off of your phone.
• If the case is dusty inside, wipe it down with a
  humid cloth.
• Trim the surplus silicone far away from the
  front. Cut it about 7 millimeters far away from
  the side edges, and 1 centimeter far away from
  the highest and bottom edges. You'll cut along
  the indentations caused by the seam between the
  phone's screen and case.
• Cut out any indentations. Inside your mobile
  phone case, you'd see little indents caused by
  the camera, flash, buttons, and sockets. Cut all
  of those out employing a sharp craft blade.
• You can also carve a rectangle or trapezoid into
  the highest and/or bottom edge for the speaker
  rather than ablation a slot.
• Sand the case smooth, if desired. More raw
  silicone on top if you would like to, then
  smooth it out with a paint spatula or Popsicle
  stick.
• Paint the stamped areas with nail enamel, if
  desired. Choose a color that goes well together
  with your case. Metallic colors, such as silver,
  work especially well! For more details Click
  Here.